Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Fog Light Bulbs 07-14 Chevy Suburban

Share on:

How to Replace Fog Light Bulbs 07-14 Chevy Suburban

Created on: 2017-08-01

How to install, repair, fix, change, or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped fog light on 09 Chevy Suburban

  1. step 1 :Removing the Fender Liner
    • Remove the 7mm bolts from the fender liner
    • Pry out the barbed clips in the liner with a flat blade screwdriver
    • Peel back the fender liner to access the bulbs
  2. step 2 :Removing the Bulbs
    • Disconnect the wiring harness
    • Press the tabs and remove the bulb
  3. step 3 :Installing the New Bulbs
    • Insert the bulb so that it matches the key ways on the housing
    • Connect the wiring harness
  4. step 4 :Reinstalling the Fender Liner
    • Press in the clips to the fender liner
    • Tighten the 7mm bolts to the liner

Tools needed for replacement

  • Ratchets & Related

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    7mm Socket

  • Specialty Tools

    Trim Tool Set

Installation Video
Watch video

Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.

We're going to peel back the passenger side fender liner to get to the fog light bulb. The driver's side will be similar. I've got the wheel turned out. You could turn the wheel in, whichever is easier for you. You could also do this on the ground, but we've got it up in the air so you could see it better.

These are 7 millimeter bolts. Once you get these loose, you can just use your fingers to pull them out. Using a flat bladed screwdriver or a trim clip pulling tool, and we're going to remove these barbed clips. Just pop those out. Fold the wheel liner up and out of your way.

The connector for it is on the top here. To undo the connector, we're going to squeeze the lock, pull it out. To undo the bulb it has two tabs on top and the bottom. We're going to squeeze those together. Pull it out and change your bulb.

When you go to reinstall it, it has key ways. There's one on one side and two on the other side, and they match the key ways there on the back of the fog light housing. There's one on this side and two on this side. So you want to make sure, when you go to put it in, you're lining those key ways up, or else it won't click in. The bulb is seated, and now you reconnect the connector, and your bulb is replaced.

Time to reinstall the splash shield. So those barbed clips are going to go in first, just push those in. Take your 7 millimeter bolts. In this video we started on the passenger side and then we moved to the driver side, but the passenger was easier, so it would be similar. Switch to my ratchet.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Specialty Tools

  • Trim Tool Set


How To Replace Windshield Wiper Blades on Your Car Truck or SUV

How To Replace Windshield Wiper Blades on Your Car Truck or SUV

Watch this video to learn how to fix streaky or squeaking wipers. The experts at 1A Auto show you how to replace the wiper blades.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...