Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Fog Light Bulbs 05-10 Chrysler 300

Share on:
  1. step : Removing the Skid Plate (0:43)
    • Remove the 10mm bolts from the skid plate
    • Remove the skid plate
  2. step : Removing the Fog Light (1:21)
    • Lift up the tab and disconnect the wiring harness
    • Turn the bulb counterclockwise
  3. step : Installing the Fog Light (1:50)
    • Turn the bulb in clockwise
    • Connect the wiring harness
  4. step : Installing the Skid Plate (2:10)
    • Insert the skid plate into place
    • Tighten the 10mm bolts to the skid plate

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video, we're going to be working with our 2006 Chrysler 300. We're going to show you how to remove and replace the fog light bulbs in your front bumper.

If you like this video, please click Subscribe. We have a ton more information on this vehicle, as well as many other makes and models, and if you ever need parts for your car, you can follow the link down in the description over to 1AAuto.com.

To remove your fog lights under this Chrysler, we'll have to remove a plastic skin plate which is usually underneath the vehicle. You can see that ours is missing, but you can see that it looks like we had some 10 millimeter hardware here, as well as at the back of the subframe here, and all the way along the bumper you can see all the little five and a half millimeter screws that used to secure it in along the bottom.

Now it's very common for these to break off, go missing, get torn off. If you have one, remove it from those places. Otherwise you can simply reach up into the bumper here, lift up on the tab for your bulb and pull the socket off. Click it one turn counterclockwise and remove it from the housing.

To install your new bulb, be sure you're wearing a pair of rubber gloves. Getting your fingers on the lens can make the oils contaminate this glass and cause them to heat up and wear out faster.

Reinstall it at the angle it was removed. Reinstall the bulb into the housing, turn it counterclockwise until it locks in. Reconnect the electrical connector.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Gloves


Search Videos
Go To Top

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...