How to Replace Fog Driving Lights 2000-05 Toyota Tundra
Created on: 2011-08-31
Check out this video on how to service or replace the driving/fog lights on your 00-05 Toyota Tundra.
-
step 1 :Replacing the Fog Light Bulb
- This step is for if you are replacing the bulb alone
- Twist the bulb base counterclockwise
- Pull the bulb out of the fog light
- Release the bulb from its base by squeezing the tab
- Push the new bulb onto the base
- Insert the bulb into the fog light
- Turn the bulb base clockwise
-
step 2 :Removing the Fog Light
- Disconnect the fog light lead
- Remove the three 10mm nuts from the fog light bracket
- Pull off the fog light
-
step 3 :Installing the New Fog Light
- Push the fog light into place, aligning the bracket onto the three studs
- Start the 10mm nuts by hand
- Tighten the 10mm nuts
- Reconnect the fog light lead
Tools needed
-
Socket Extensions
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to remove and put back in the bumper mounted driving or fog lights on this 2002 Toyota Tundra. The only tool you'll need is a 10 millimeter socket with a ratchet and 2 inch and 6 inch extensions. In this video, I do have the vehicle up on a lift, but that's not necessary; it just made it a whole lot easier to video for you.
If you're looking to change the bulb or change your fog light, you can see it's right back up in here. To change the bulb, all is you'll do is reach up in, twist it counter clockwise, and work the bulb out. You can see there's a little tab right here. Press the tab and pull the bulb out. Obviously, to reconnect, you push it in, make sure the tab locks down, put it back in, and turn it clockwise.
If you're looking to replace the whole assembly, there's three bolts; one there, one right there, and one on top there. Those bolts are 10 millimeters, so I'm going to use a 10 millimeter socket on a 6 inch extension and a ratchet. You can reach up and disconnect our lead first. For the top one, I'm going to use a smaller extension. The light in our truck is obviously in really good shape, so I'm just doing this to show you. Reinstallation is reverse. Be sure we don't get out harness stuck up in there. Pput the light up in. Make sure it goes on to all three of the studs. I'll just fast forward a little bit as I start those 10 millimeter nuts by hand. After you tighten it up, you can connect your lead.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
2000-06 Toyota Tundra Passenger Side Fog Light Eagle Eyes TY660-B000R
Part Details:
- Features and Benefits
How to Replace Fog Light Lens 2014-17 Subaru Crosstrek
New Fog / Driving Light from 1AAuto.com How to install, repair, fix, change, or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped fog light on 14 Subaru Crosstrek
