How to Replace Fog Driving Light 2000-05 Chevy Impala

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.

In this video we're going to show both how to change a fog light bulb if you have a bad bulb or actually change the whole assembly itself if you've had a broken fog light, which often happens on these cars. The only tool you'll need is a Phillips screwdriver.

We're replacing your fog light. Often they'll get broken by rocks. You can see this one's pretty chipped up and faded. Get one from 1A Auto, nice and clear and clean. Also if you just want to replace the bulb, all you do is remove this Phillips screw here. Slide it to the side and forward. Your bulb is connected right here, the little tab, pull up on the tab.

If you just want to change your bulb, it twists out. Like I said, get one from 1A Auto, nice and clear. Obviously if you've broken it, you want to replace it, but you also might want to do this if you just want to give the front end of your car a little face lift. New lights help that a lot. Plug it right in. There's a tab here that goes into a slot in the bumper, so you just feed that back corner in first, make sure it goes right back in, and then put the screw in. You want to make it snug, not too tight though. We hope this helps you out.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.