How to Replace Fender Turn Signal 2001-07 Volvo V70
Created on: 2014-03-26
How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped signal light on 01, 02, 03, 04, 05, 06, 07, Volvo V70.
-
step 1 :Removing the Side Marker Light
- Remove the three rivets from the inner fender with a 1/4 inch drill bit
- Push in the tabs to the light from the inner fender
- Disconnect the side marker wiring harness
-
step 2 :Servicing the Bulbs
- Twist the bulb socket counterclockwise out of the light
- Pull the bulb off of the socket
- Push on the new bulb
- Twist the bulb clockwise into the light
-
step 3 :Installing the New Side Marker Light
- Reconnect the wiring harness to the side marker
- Push the side marker light into place
- Punch out the rivets on the inner fender with a hammer and punch
- Secure the inner fender with a rivet gun or coarse thread bolts
Tools needed
-
Coarse Threaded Bolts (to replace rivets)
Hammer
Rivet Gun & Rivets
1/4 Inch Drill Bit
Center Punch
Drill
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a side marker light on this 2002 Volvo V70. Tools you'll need if you have to do the whole project: new side marker light from 1AAuto.com, drill with quarter-inch drill bit, hammer, punch, rivet gun.
Most likely, your side marker light has been damaged, so you will be able to skip the part where you have to drill the rivets and instead use some force (either some pliers or a screwdriver) to pry the old light out and then put the new light from 1A Auto in.
If you're just looking to service the bulb, and you need to get the light out, and there's no damage to the light itself, you'll need to remove these three rivets. You remove them by drilling the center with your drill and quarter-inch drill bit. On the back of the light, there's two tabs that you have to push in and then push the light out. Reach in behind your inner fender, push those tabs, and the light pushes out. Then push the tab on the harness and disconnect it.
To service the light, you just twist out the socket, pull the bulb out, push your new bulb in, and twist the socket back into place. On the left is the old side marker light; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same. Reconnect the harness to your new side marker light, and then just push the light back into place.
Using a hammer and a punch, just punch out those rivets. If you did remove the rivets from your wheel well, re-secure them. Here, we're showing you a rivet and rivet gun. You could also use coarse-thread bolts in the place of the rivets.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Volvo S60 S80 V70 XC90 Driver Side Repeater Light DEPO 373-1401L-AQ-S
Part Details:
- Features and Benefits
How To Replace Front Side Marker Light 2002-10 Mercury Mountaineer
How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped side marker light on 02, 03, 04, 05, 06, 07, 08, 09, 10 Mercury Mountaineer.
