How To Replace Fan Speed Resistor 2005-09 Chevy Equinox
Created on: 2014-02-11
Follow the steps for this easy repair and replace a bad fan speed resistor yourself!
-
step 1 :Remove the AC/Heater fan speed resistor
- Under the passenger side dash, below the glove box, there is a panel secured by three bolts.
- Remove this panel with your 7 mm socket and ratchet.
- Disconnect the wiring harness.
- Unbolt the resistor using your 1/4 inch socket and ratchet.
-
step 2 :Install the new AC/Heater fan speed resistor
- Insert the resistor into place and secure with the two quarter inch bolts using your socket and ratchet.
- Connect the wiring harness to the resistor.
- Replace the panel under the dash and secure it with your 7 mm socket and ratchet.
Tools needed
-
1/4 Inch Socket
7mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Don from 1A Auto. I hope this how-to video helps you out and the next time you need a part for your vehicle think of 1AAuto.com. Thanks.
In this video, we show you how to replace the blower motor resistor on this 2014 GMC Terrain. The only tools you'll need for this is a 7mm socket and a 1/4 inch socket and a ratchet. On the passenger's side, underneath the glove box, you want to remove this panel and it's held in with three 7mm bolts. One more, the third one right there. We'll just fast forward as Don removes all three of those. Now pull this panel straight back so it releases this clip. Your blower motor resistor is located right here and you want to start off by disconnecting these harnesses, just push on the tabs and pull them free.
The resistor is held in with two 1/4 inch bolts and we'll just fast forward as Don removes those. Once the bolts are removed, the resistor will just pull down and out. Take your new resistor and push it up into place and replace those two 1/4 inch bolts. We'll just fast forward as Don does this and tightens those up. Reconnect those two harnesses. Take this panel and you want to push these two clips into these two slots, push them back in and push the panel up and then replace those 7mm bolts. Then you are all set.
We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Blower Motor Module 2000-08 Nissan Maxima
Need to replace a blower motor module? Watch this video and learn how to do this easy repair yourself
