How To Replace Evaporative Canister Purge Valve 2002-07 Jeep Liberty
Created on: 2014-01-13
Watch this video to learn how you can easily replace the evaporative emissions canister purge valve on your 02-07 Jeep Liberty.
-
step 1 :Remove the evaporative canister purge valve
- Disconnect the wiring harness
- Lift your fuse box up and back to slide the evap canister purge vale off and disconnect the hoses.
-
step 2 :install the new evaporative canister purge valve
- Connect the hoses and put the purge valve into place.
- Hook up the wiring harness.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi. I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the EVAP Canister Purge Valve on this 2006 Jeep Liberty, and the only tool you'll need for this is a pair of pliers. Your EVAP Canister Purge Valve is located right here next to your battery, and you want to start off by pushing this red clip. Just use a pair of pliers. Push the clip out, and now you can disconnect the harness ... and now lift your fuse box up and back, and then slide the EVAP Canister Purge Valve up ... and then next, just disconnect the two hoses.
Take your new EVAP Canister Purge Valve and reconnect those two hoses. Slide it back down into place and reconnect your harness, and push that red clip in, and you're all set. We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Top 5 Problems Chevy Avalanche Truck 1st Generation 2002-06
This video discusses the top problems with the 1st generation Chevy Avalanche, which includes model years 2002 to 2006.
