How To Replace EVAP Purge Valve 1996-2000 Nissan Altima
Created on: 2014-01-06
Watch this video to learn how you can easily replace the EVAP canister purge valve on your 96-00 Nissan Altima.
-
step 1 :Removing the Evaporative Canister Purge Valve
- Disconnect the purge valve wiring harness
- Remove the 12mm nut from the purge valve
- Slide back the hose clamps with needle nose pliers
- Pry the hoses of the purge valve with a flat blade screwdriver
-
step 2 :Installing the Canister Purge Valve
- Put the purge valve into place
- Fasten the 12mm nut onto the purge valve
- Connect the hose to the purge valve
- Slide on the hose clamps with the pliers
- Connect the purge valve wiring harness
Tools needed
-
Flat Blade Screwdriver
Needle nose pliers
12mm Wrench
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the evap canister purge valve on this 2000 Nissan Altima with the 2.4 liter engine. It's the same part and process on these from '97 to 2001. The items you'll need for this are a small flat blade screwdriver, a pair of pliers, and a 12mm wrench.
First, we want to disconnect the harness from the purge valve. You just push in on this tab with the screwdriver and pull it free. On the back of it, there's a 12mm nut. Just go ahead and remove that. Once you break it free you can just loosen it up and remove it by hand. Now use a pair of pliers to slide back the hose clamps. Then, using your small flat blade screwdriver, you just want to pry those hoses off. You want to be careful not to damage the hose.
Now, take your new canister purge valve and put into place, and replace the 12mm nut on the back. Then use your wrench to tighten it. Then you want to put those hoses back into place, and using your pliers, slide those hose clamps forward. Then reconnect your harness and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How To Replace Front Axle Vacuum Solenoid 2005-13 Ford F-150
Check out this video teaching you how to replace the 4WD front axle solenoid on your 05-13 Ford F-150.
