How to Replace Engine Splash Shield 1999-2009 Volkswagen Jetta
Created on: 2015-02-23
Find out how to remove and replace a broken lower splashshield guard on the 99-09 Volkswagen Jetta with this how-to video
-
step 1 :Removing the Splash Guard
- Remove the T25 screws from the splash guard
- Release the splash guard clips
- Pull down the splash guard
-
step 2 :Installing the Splash Guard
- Slide the splash guard into place
- Clip in the splash guard
- Insert the T25 screws into the splash guard
Tools needed
-
Jack Stands
Floor Jack
T25 Torx Socket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we are going to show you how to remove and replace the splash guard on this 2005 Volkswagen Jetta. The items you'll need for this are a T25 torx driver and jack and jack stands.
Underneath the front of your car, on the splash guard, there is a series of T25 screws. We'll fast forward as Mike removes all of those. Push the two tabs on the splash guard, and it falls free.
Push the larger tabs up and over. Then, slide the splash guard into place. Then just replace those T25 screws and tighten them up.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also, check out our other helpful how-to, as well as, diagnosis videos.
Shop Products
VW Golf Engine Splash Shield TRQ BDA12055
Part Details:
- Plastic
- Standard Replacement
- Specific
- No
How to Replace Inner Fender Liner 2001-2005 Honda Civic
This video shows you how to install an inner fender liner on your 2001-2005 Honda Civic.
