How to Replace Engine Mount 2001-06 Hyundai Elantra
Created on: 2013-05-19
Watch this video for detailed instructions on how to replace the engine mount on your 01-06 Hyundai Elantra.
-
step 1 :Removing the Motor Mount
- Raise and secure the vehicle
- Support the transmission with a jack
- Remove the four 14mm bolts from the motor mount
- Pull down the motor mount
-
step 2 :Installing the Motor Mount
- Lift the motor mount into place
- Insert the four 14mm bolts into the motor mount
- Tighten the four 14mm bolts
- Lower the jack
- Lower the vehicle to the ground
Tools needed
-
14mm Wrench
14mm Socket
Jack Stands
Ratchet
Floor Jack
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the rear engine mount on this 2005 Hyundai Elantra with a 2.0 liter, pretty much the same as any 2001-2006 Elantra. You'll need a jack and jack stands.
You'll need to raise up and support the car, and then also support the engine lightly. And then you'll need a 14 millimeter socket and ratchet as well as a 14 millimeter wrench. It's actually a pretty easy operation once you have the car up on jack stands.
Your rear lower motor mount is on the back side of the transmission. You want to support the transmission just slightly, right next to the mount itself. And then locate your one, two, three, four mounting bolts. And those are 14 millimeters.
It's not that big of a mystery, just need to know where it is and how you get to it. Use jack and jack stands, 14 millimeter socket and ratchet, and a 14 millimeter wrench. Remove the bolts, and the mount comes down, and then you can put a new mount up in its place. As you can see our original mount is in fine shape, so we're just taking this apart and putting it back together to show you.
Now I'm putting the motor mount back up in. I put my four bolts back in loosely before I go and tighten it in. With that done, I'll tighten back up. With everything tight I can remove my jack, pull it out of the way.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Front Engine Mount 2002-06 Nissan Altima
Got a bad engine mount? Follow the steps in this video and replace it yourself!
