How to Replace Engine Air Filter 2007-14 Chevy Suburban

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.

First, you want to open the engine compartment or the hood. To do that, pull out the hood release lever. Then up underneath the hood, you pull the little lever on the hood latch to your right as you're looking at it. Then lift up the hood.

Your air filter's right in the front on the passenger side. There are four T-25 screws that hold it on: one, two, three, and then the fourth one is a little more difficult, right down in near the radiator. You loosen them up, and then they'll come up a certain ways, but they don't come out. You just want to leave them with the housing. All right, once you have it loose, you can pull the housing up, and reach in, pull the air filter up and out.

Place the new filter back down in. Make sure it goes into place and that it's seated down correctly. You need to kind of just push your screws back up through. There's a hose down here that it can get caught on. Put it down into place. Make sure all the mounting points are lined up, and you can start your screws in by finger first. Then use your T-25 to tighten them up. You want to get them firm, but don't over-tighten them.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.