Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How To Replace Engine Air FIlter 00-07 Chevy Monte Carlo

Share on:

How To Replace Engine Air FIlter 00-07 Chevy Monte Carlo

Created on: 2021-01-16

How to repair, install, fix, change or replace a dirty, dusty or clogged air filter on 00, 01, 02, 03, 04, 05, 06, 07, 08 Chevy Monte Carlo

  1. step 1 :Removing the Air Filter
    • Disconnect the Mass Air Flow (MAF) sensor wiring harness
    • Loosen the intake hose clamp with a flat blade screwdriver
    • Pull off the intake hose
    • Undo the air filter box tabs
    • Slide off the air filter cover
    • Pull out the air filter
  2. step 2 :Installing the Air Filter
    • Clean the air intake box
    • Put the air filter into the air filter box
    • Slide on the air filter cover
    • Clip on the air filter box tabs
    • Push on the intake hose
    • Tighten the intake hose clamp with a flat blade screwdriver
    • Connect the MAF sensor wiring harness

Tools needed for replacement

  • Screwdrivers & Related

    Flat Blade Screwdriver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the air filter on this 2003 Chevy Monte Carlo. The only tool you'll need for this is a flat blade screwdriver.

Start off by lifting up the tab and disconnecting the harness to your mass air flow sensor, and then loosening up this hose clamp, using a flat blade screwdriver. Pull the hose free and tuck it down and underneath the mass air flow sensor. Lift up on these tabs on your air intake box and then slide this outside part of your intake box up and out. Now your air filter will just pull forward and out.

Take your new air filter and make sure you brush out the inside of your air intake box. Then push your new air filter into place. Take the outside of your air intake box and slide it back down and reconnect the intake hose. Once you get it into place, line up the tabs on the bottom of the outside part of the intake box into the slots and push it down into place. Then reclip these two clips, once you have that lined up. Make sure the arrows are lined up. Then tighten up the hose clamp. Now reconnect your harness and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver


Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...