Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace EGR Control Solenoid Valve 98-01 Nissan Altima

Share on:

How to Replace EGR Control Solenoid Valve 98-01 Nissan Altima

Created on: 2021-01-16

Check out this video teaching you how replace the EGR control solenoid valve on your 98-01 Nissan Altima.

  1. step 1 :Removing the EGR Valve
    • Push in the tab on the EGR harness with a flat blade screwdriver and pull it free
    • Remove the three hoses with a flat blade screwdriver or pliers
    • Remove the 10mm bolt from the EGR
    • Remove the EGR valve
  2. step 2 :Installing the New EGR Valve
    • Push the hose onto the EGR valve
    • Push the stud onto the bracket and replace the 10mm nut
    • Tighten the 10mm nut
    • Replace the last two hoses
    • Reconnect the EGR harness

Tools needed for replacement

  • Pliers, Cutters & misc Wrenches

    Needle nose pliers

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Wrenches - Metric

    10mm Wrench

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the EGR control solenoid valve on this 2000 Nissan Altima with a 2.4 liter engine. The items you'll need for this include a new EGR control solenoid valve from 1AAuto.com, a flat blade screwdriver or pliers, and a 10mm wrench.

Your control solenoid valve is located right here, and you just want to push in the tab on the harness and pull it free. This is held on by a 10mm nut and these three hoses. To start off, use a flat blade screwdriver (or pliers) and pull these hoses free. You can see we actually use both tools. Then, using a 10mm wrench, you just remove that nut, and the valve pulls free.

On the left is the old EGR control solenoid valve; on the right is the new one from 1A Auto. You can see they're identical and will mount exactly the same.

Take your new control solenoid valve. Push the hose into place. Push the stud back through the bracket and replace that 10mm nut. Then tighten it up with your wrench and push those last two hoses into place. Reconnect your harness, and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 10mm Wrench

2001 - 2003  Infiniti  QX4
1996 - 1999  Infiniti  I30
2001 - 2001  Nissan  Pathfinder
1998 - 2001  Nissan  Altima
1995 - 1999  Nissan  Maxima

How to Replace Front Wheel Hub Assembly on any Car Truck or SUV

How to Replace Front Wheel Hub Assembly on any Car Truck or SUV

Learn how to replace your own front wheel hubs. In this video, the expert mechanics at 1A Auto will show you how to replace a hub that's vibrating, groaning or loose.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...