How to Replace Driveshaft Support Bearing 2005-2010 Chrysler 300
Created on: 2023-02-28
This video shows you how to install a driveshaft center support bearing on your 2005-2010 Chrysler 300.
Tools needed
-
12mm Socket
13mm Socket
A Piece of Pipe (for leverage)
Torque Wrench
Hammer
Socket Extensions
14mm Socket
Rust Penetrant
18mm Wrench
Pry Bar
18mm Socket
10mm Wrench
Bearing Separator
Liquid Thread Locker
Pliers
T55 Torx Socket
Bearing Grease
Pole Jack
1/2 Inch Ratchet
Bungee Cord
Anti-Seize Grease
Ratchet
Swivel
Marker / Writing Utensil
Shop Products
Dodge Chrysler Rear Driveshaft Center Support Bearing DIY Solutions ADS00449
Part Details:
- Highest Quality Materials
- Quality Tested - built to a strict level of product standards.
- Ball Bearing
- Bracket
- Yes
- 7.59 in
- Rubber & Steel
- 191.03 mm
- No
- 48.52 in
- 7.38 in
- 1.181 in
- No
- 187 mm
- 30 mm
- 3
Truck Drive Train Noises Check the Drive Shaft Carrier Bearing
Watch this video to learn how to diagnose a common source of drive shaft vibration and noise.
