How to Replace Driver Side Reverse Light Bulb 2008-12 Ford Escape

1. step 1 :Removing the Driver Side Tail Light 0:30

   • Remove the Phillips head screws from the tail light
   • Pull the tail light assembly straight back
   • Disconnect the electrical connectors from the sockets

2. step 2 :Servicing the Driver Side Reverse Light Bulb 1:05

   • Turn the socket counterclockwise
   • Pull the bulb straight off of the socket
   • With gloves on, press the new 921 bulb to the socket
   • Turn the socket clockwise

3. step 3 :Installing the Driver Side Tail Light 1:28

   • Remove the protective covers from the socket
   • Transfer over the sockets from the old light to the new light
   • Connect the electrical connectors from the sockets
   • Press the tail light into place
   • Tighten the Phillips screws to the tail light

Tools needed

• Gloves

  Phillips Head Screwdriver