How To Replace Driver Power Window Switch 2001-05 Honda Civic Coupe
Created on: 2016-03-16
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 01, 02, 03, 04, 05 Honda Civic
-
step 1 :Removing the Power Window Switch
- Pry up the trim piece in the door pull with a flat blade screwdriver
- Remove the Phillips screw in the door pull
- Pry up the switch and door pull with the a flat blade screwdriver
- Disconnect the window switch wiring harness
- Remove the three Phillips screws from the window switch
- Remove the switch
-
step 2 :Installing the Power Window Switch
- Insert the switch
- Tighten the three Phillips screws
- Connect the window switch wiring harness
- Press the door pull and switch into place
- Tighten the Phillips screw in the door pull
- Place the trap door in the door pull
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and reinstall the driver's power window switch. This is a 2003 Honda Civic, and it's similar for many Civics in this generation. The only tools you'll need is a flat blade screwdriver and a Phillips screwdriver.
In your door pull, there's a small trap door. Flat blade screwdriver, pry it up, and underneath you'll see a Phillips head screw. Flat blade screwdriver, pry up on the front, and then there's a tab in the back so you just pull it forward. On the backside there's a connector. Just press this little button here and disconnect it. On the backside, three Phillips screws hold it in. Once the screws are out, the switch comes right out.
Put your new switch back in the bezel, install the screws. I like to put them in, just make sure they're going in correctly so you don't cross-thread or strip the plastic. Reconnect the harness, make sure it clicks. Just tap those in first, tap down, and you can just kind of drop your screw down in, tighten up.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Shop Products
Honda Civic CR-V Front Driver Side Power Window Switch DIY Solutions BSS00404
Part Details:
- Black
How to Install Master Power Window Switch 2010-17 Chevy Equinox
Remove an old, stuck, or shorted out master power window switch from your 10-17 Chevy Equinox, and replace it with a new, quality, engineered to fit replacement from TRQ. How to do it yourself.
