Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Downstream O2 Sensor 05-10 Chrysler 300

Share on:
  1. step : Removing the Oxygen (O2) Sensor (0:50)
    • Raise and secure the vehicle
    • Disconnect the oxygen sensor wiring harness
    • Remove the O2 sensor with a 22mm wrench
    • Tap the wrench with a hammer if necessary to loosen the sensor
  2. step : Installing the New O2 Sensor (3:14)
    • Take off the shipping cap
    • Twist the new O2 sensor into place
    • Tighten the O2 sensor with a 22mm wrench
    • Connect the O2 sensor wiring harness
    • Lower the vehicle to the ground
    • Disconnect the negative battery cable to clear diagnostic trouble codes
    • Reconnect the negative battery cable

Hi, I'm Mike from 1A Auto. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video, we're going to be working with our 2006 Chrysler 300 3.5 liter. We're going to show you how to remove and replace the rear or downstream O2 sensor. We replaced the one on the passenger side, however this process will be the same for the driver side, as well as for the 2.7 liter V6s. If you like this video, please click subscribe. We have a ton more information on this car as well as many other makes and models and if you need this part for your vehicle, you can follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.

The downstream or rear O2 sensor on your Chrysler 300 is located here, just behind this catalytic converter on the exhaust. Follow the sensor over, push down, and release the electrical connector. You can remove this O2 sensor with a 22 millimeter wrench. Now I find the best way to remove these, because they can be pretty stubborn is to do this when the exhaust is hot. Be careful not to touch the pipe. You may have to tap that wrench on there a little to get it to bite. Tapping the end can help shock that sensor loose, and make it a lot easier to remove. Once you've got it cracked loose remove it the rest of the way with your 22 millimeter wrench.

Here we have our old part that we removed from our vehicle, and our new part from 1AAuto.com. As you can see, these parts are exactly the same. We have a nice new harness on ours, a little bit longer wire to make sure that it fits this application without stretching that wire out and making it tight and damaging it. On the end, we have this little cap which keeps dirt and debris out of that during shipping, as well as keeps that anti-seize on the threads, which comes right from the factory. Meaning when we thread this in, it won't get locked in there should we ever have to remove it again.

What your downstream or rear O2 sensor does is reads the exhaust gases coming out of the backside of your catalytic converter. This ensures that the catalytic converter is processing those harmful emissions gasses properly, and sending a cleaner, acceptable emission out of the tailpipe. So if you have a check engine light for a bad rear O2 sensor, or if you have one for a bad catalytic converter, these can also give a false reading, making that catalytic converter appear to go bad. This new sensor from 1AAuto is going to go in direct fit, just like your original equipment, and fix you up right.

Install your new O2 sensor into the bung on the pipe, get those threads started. Make sure that you keep the pigtail for the wiring harness out of the way so it doesn't get stuck in there. Once you get it started, go ahead and tighten it back down until it seals with a 22 millimeter wrench. Reconnect the electrical connector.

If your vehicle had any codes, disconnect the negative side of the battery and allow it to sit for a few hours, or use a scan tool or local repair shop to clear that check engine light and you’re good to go.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Wrenches - Metric

  • 22mm Wrench

2005 - 2010  Chrysler  300
2004 - 2004  Chrysler  Sebring
2005 - 2008  Chrysler  Pacifica
2004 - 2010  Chrysler  PT Cruiser
2008 - 2009  Chrysler  Aspen
2004 - 2004  Chrysler  Pacifica
2004 - 2010  Chrysler  Town & Country
2005 - 2006  Chrysler  Sebring
2004 - 2007  Dodge  Caravan
2004 - 2005  Dodge  Caravan
2006 - 2010  Dodge  Charger
2001 - 2001  Dodge  Dakota
2008 - 2009  Dodge  Durango
2004 - 2010  Dodge  Grand Caravan
2004 - 2005  Dodge  Grand Caravan
2001 - 2003  Dodge  Durango
2006 - 2010  Dodge  Dakota
2005 - 2009  Dodge  Durango
2002 - 2003  Dodge  Dakota
2002 - 2002  Dodge  Dakota
2005 - 2010  Dodge  Dakota
2003 - 2003  Dodge  Dakota
2003 - 2003  Dodge  Ram 2500 Truck
2005 - 2010  Dodge  Ram 2500 Truck
2009 - 2010  Dodge  Ram 1500 Truck
2006 - 2006  Dodge  Ram 1500 Truck
2004 - 2005  Dodge  Neon
2007 - 2008  Dodge  Magnum
2005 - 2008  Dodge  Magnum
2008 - 2010  Dodge  Viper
2004 - 2004  Jeep  Liberty
2005 - 2006  Jeep  Wrangler
2006 - 2006  Mitsubishi  Raider
2005 - 2010  Dodge  Ram 3500 Truck
2003 - 2003  Dodge  Ram 3500 Truck
2005 - 2006  Dodge  Stratus
2004 - 2004  Dodge  Stratus
2003 - 2010  Dodge  Viper

01-09 Chrysler Dodge Jeep Mitsubishi Multifit Upstream or Downstream O2 Oxygen Sensor

Dodge Jeep Chrysler Mitsubishi O2 Oxygen Sensor DIY Solutions EMS00224

This part replaces:

  • Standard Motor Products SG1850
  • OE # 4727446AC
  • Walker Products Inc. 250-24835

Part Details

How Do I Tell If I Have a Bad Front Wheel Bearing Hub Assembly?

How Do I Tell If I Have a Bad Front Wheel Bearing Hub Assembly?

A bad wheel hub or bearing is a common problem in older vehicles. Check out this video to learn how to identify the problem in your own vehicle.

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...