How to Replace Door Panel 2013-18 Subaru Forester

Hey friends. It's Len here at 1A Auto. Today I'm working on a 2014 Subaru Forester. We're going to be showing you how to remove the left front door panel. Can be a very easy job. I want to be the guy that shows you how to do it. If you need any parts or instructional videos, you can always check us out at 1aaauto.com. Thanks.

All right, so here we go. We've got our door open. We're looking at our door panel. We're going to use a small pocket screwdriver or whatever you happen to have, something small. Right here there's a little flappy door. I'm just going to grab this. Pop it open. Behind there there's a Phillips head screw located right there.

We're going to remove that. Phillips head screwdriver, turning it counter clockwise of course. Grab that little screw out of there. That's what it looks like. When you use something like these, these are called trim tools. They're plastic, so you won't mar up any of your plastic door panel here. Feel along the bottom. Just make sure you don't feel any screws or anything like that that go in, hold it to the door itself. Feels pretty good.

I'm just going to start along the bottom. I'm going to use my door panel tools here. See if I can find where the little clips are. Like there's one right above there. Here we go. Feels like it's getting tighter up here. Then this side, the same thing. Feels pretty good. Just try shaking it around a little bit. Looks like it gets tight up here.

All right. While we're moving it around, I feel like it's getting ready to come loose here. Try wiggling it. It feels as though there's something holding it in right here. So I'm just going to grab something. I'm going to try to pop this off real quick. Okay. I've got my pocket screwdriver again. Right here there's a little slot. I'll show you it. One second here. I'm trying to get that off. Right here is where I went. Right in between there and here. Just pulls out these little tabs.

Now we're going to find two more Phillips heads. One right there. One located down here. You can pick which one you want to remove first. You do you boo-boo. One, looks just like the first one. We'll grab this one. Number three, just like the other two. Go Beans. I'm going to grab our door panel, wiggle it around. It comes right up now.

Behind here there's going to be some wiring and some cables. You just want to make sure you take a look and see what's going on before you go ahead and hang it. We're going to disconnect all we can. I'm going to take this white one right here. Let me try to remember the white goes up top. You can mark it if you need to or whatever you need to do to remember, or just watch the video to see how it was removed and just reinstall it that way. Anyway, white one, pull it. Let me take a peek. Just a little ball. Easy-peasy. I'm going to go with the green. I'm just going to pull it out. Lift it. Let's keep on rolling.

Down here should be a little push clip right in the center. There's the push right there. That's where I pushed on. There's one right here. Let me try to push on that one. Here we are. Feel around the big one here. That one's probably on the other side. Let's see if I can find it. I'm going to try to use a little pick. I'm going to push it on the center right here. I'll show you where I'm pushing. Subaru was nice and they put it in the back where you can barely get to. But we would just push right there and that unlocks this little clip right here.

Here we go. We've got some electrical connectors here. We're going to go ahead and connect all these in, and then we're going to move along. We're going to connect in that one down there. And of course we're going to put it in our little cables. Very important. You don't want to leave these off because, well, good luck getting in.

Here we go. We've got one big one. It's going to go right down here in the bottom. Click. And a couple of other ones here. Click. This one right here, goes up higher. Click. Easy-peasy. Cool. We'll do that electrical connector in one second down there. Just hang it so it's ready to go. I'm going to do these while I'm up here and then I'm just going to set the door panel inside its little thing so I can get down under there.

We've got two cables. We've got our green cable. This one goes down to the handle. I'm going to go ahead and slide it in. Then we're going to lock it into this little doohickey. Boom. Okay, right here, the top one. This is the lock cable. Just goes in. See if I can get it. Oops. You want to make sure the door's in the locked position here. Makes it easier to get the cable in.

Here we are. I'm going to lock it in. Here we are. Perfect. I'm just going to take the door panel. I'm just going to set it up on here. Now I can let go for a second. We've got our cable right here, wiring harness. Just going to go into the little light. Let me see if I can find it real quick. Yup. Okay.

So right here, this is going to go right in. Let me see if I can find it again. I'll show you right where I am. The lock goes facing up. Clicks in. Easy-peasy. Everything's in there. Cool.

All right, before I go ahead and clip this in, I'm just going to test it real quick. We're going to go ahead and unlock it. Now we're going to go ahead and lock it. That works perfect. Cool.

Now we'll say that it's ... Let's see, I'm going to go in actually, because that's the door handle I'm going to be testing. I'll go in and then I'm going to try to open the door. Cool. Now I'm going to try it again, but I'm going to lock it. Unlock. Perfect. All right, let's get this door panel mounted in. Make sure it goes down. No binding. Goes back up. Love it. Door locks. Great. Here we are. Works. Works.

Here we go. We're going to test the mirror, left side mirror. Looks good. All right. Now we can go ahead and put the door panel on. We'll make sure that the door panel's pulled down fully. We tested everything. We're good to go. We made sure we plugged in this light down here. Definitely on, nice and bright. Somebody put in LED. That's cool. There's little holes inside the door panel or the door itself. That's where the pins from the door panel are going to sit into. You just take a peek, make sure you got them looking like they're pretty lined up. Start at the top. Work your way around. Just give it a little bonk. Bonk, bonk. That's my thing. Here we are. Feels like maybe one more here.

We've got three screws. One here, there, and there. Theoretically we should have three screws left, and we do. We're going to go ahead and put these in. We're just going to start them in until we get all three started. One screw, two, three. Going to use our screwdriver. We're going to turn them into the right. Like I said, I'm not going to tighten it down yet till I get all three of them started in. It's very important in case you need to shift the door panel around at all, line up the holes. Just going to help save you a little bit of time in the long run. Here we are. This was the last one, so I'm just going to snug it right up. That feels good. This one. Feels good. Last one. Feels good.

Close our little door here. Nice. We're going to put this on. It's this right here. It's got this right here. This goes down in there. Once it's in, you just line everything up. Give a little squeeze. All right. Now if you wanted to, you can go ahead and clean it down, get off any fingerprints you might've put on there, or leave them, whatever you did.

Thanks for watching. Visit 1aauto.com for quality auto parts shipped to your door, the place for DIY auto repair. And if you enjoyed this video, please click the Subscribe button.