How To Replace Door Lock Cylinder 1982-92 Chevy Camaro Iroc-z
Created on: 2011-07-18
This how-to video will show how to remove the door panel and door lock cylinder on the 82-92 Chevy Camaro IROC-Z
-
step 1 :Removing the Door Panel
- Remove the screws from the door pull
- Remove the door pull
- Remove the screws from the door handle bezel
- Pry off the switches
- Disconnect the switch wiring harnesses
- Remove the door handle bezel
- Pry off the door panel with a putty knife or door panel removal tool
- Carefully pull back the water shield, being sure not to tear it
- Remove the window weatherstripping
- For more detailed instructions, please see the 1986 Camaro door panel replacement video
-
step 2 :Removing the Door Lock Cylinder
- Using a flat blade screwdriver, separate the lock cylinder from the clip
- Pull the lock cylinder out from the outside of the door by hand
- Remove the lock cylinder from its rod
- Remove the lock cylinder by hand
Tools needed
-
T10 Torx Driver
Flat Blade Screwdriver
T27 Torx Driver
Putty Knife
8mm Wrench
8mm Socket
Door Panel Removal Tool
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to be removing the door lock cylinder on this 1986 Camaro Iroc-Z, a pretty easy procedure. It basically involves removing the door panel and then removing the cylinder. Tools you'll need are T27 and T10 torques drivers, medium and small flat blade screwdrivers, an 8mm wrench or socket and ratchet, door panel clip tool, a putty knife, and those are basically all the tools to get the door panel off. Then beyond that, you just need a larger flat blade screwdriver to help with the door lock itself.
To replace the lock cylinder and to remove the lock cylinder for painting, first you're going to want to remove the door panel. I'm showing it here in fast motion. If you want to see this in regular speed, just check out our other videos for the Camaro door panel removal and you can see it there, although you can probably figure out enough to see that it's a few screws. Unhook some of the switches and then carefully pry out on a bunch of pins and then the panel up and off.
For the lock cylinder you feel up in here and you can feel all the way to the cylinder. You'll feel a clip holding it on. Take a nice thick, 5/16 inch screwdriver and with this hand, I'm driving it right up between the lock cylinder and the clip. What I did was I pried out on the clip a little bit, got it to move, and then I forced it up, and then I was able actually to flip it off with my hand. See if I can find the clip here. It fell down. Here's the clip. Now you can see, the lock cylinder will come right out. Our rod is still on there. You can see down in and see that our rod is still locked on there. I'll reach up there again. I can pretty easily feel the clip, push the clip off, and there's your lock out. This is the clip. The rod just goes right up and in. This clips onto it. You pull it back and pull the rod out. This lock is in pretty rough shape. You clip this, and basically lock it like that, so you want to guide that screwdriver up, kind of pry it a little bit. Maybe you can push on it with the screwdriver and then you can usually pull that off with your fingers the rest of the way.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Door Lock Cylinder 2001-2005 Ford Explorer Sport Trac
This video shows you how to install a new door lock cylinder on your 2001-2005 Ford Explorer Sport Trac.
