How to Replace Door Jamb Switch 1992-2000 Honda Civic
Created on: 2013-12-30
How to replace a broken door jamb dome light switch to the Honda Civic, years 96, 97, 98, 99 and 00.
-
step 1 :Remove the door jamb dome light switch
- Pull back the rubber boot.
- Remove the Phillips screw.
- Pull the door jamb switch out.
- Disconnect the electrical lead.
-
step 2 :Install the new door jamb dome light switch
- Connect the electrical lead.
- Insert the switch into the door jamb.
- Secure with the Phillips screw.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Hi I'm Don from 1A Auto. I hope this how to video helps you out and the next time you need a part for your vehicle think of 1AAuto.com. Thanks.
In this video we show you how to replace a door jamb switch on this 1998 Honda Civic and the only items you'll need is a new door jamb switch from 1AAuto.com and a Philips screwdriver. Your door jamb switch is located right here, just pull back the rubber tab and remove this Phillips screw and it pulls out. Just disconnect this wire.
On the right is your old one; on the left is the new one from 1A Auto. You can see they're identical in every way and it'll mount exactly the same. Reconnect your wire, push the new door jamb switch into place and tighten up that Phillips screw. Replace the rubber tab and you're all set.
We hope this helps you out, brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
How to Replace Lift Gate Door Jamb Switch 2002-2005 Ford Explorer
This video shows you how to replace the Lift Gate Door Jamb Switch on your 2002-2005 Ford Explorer.
