Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Corner Light 98-00 Toyota Corolla

Share on:

How to Replace Corner Light 98-00 Toyota Corolla

Created on: 2021-01-16

How to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights and parking lights on your vehicle on 98, 99, and 00 Toyota Corolla models.

  1. step 1 :Removing the Parking Light
    • Remove the Phillips head screw from the parking light
    • Pull the parking light forward and out
  2. step 2 :Servicing the Parking Light Bulb
    • Twist the bulb socket out of the light
    • Pull the bulb out of the socket
    • Push the new bulb into the socket
  3. step 3 :Installing the New Parking Light
    • Disconnect the bulb socket from the parking light wiring harness
    • Insert the socket into the new parking light
    • Connect the wiring harness to the parking light
    • Push the parking light into place using the locating tab
    • Insert the Phillips screw into the parking light

Tools needed for replacement

  • Screwdrivers & Related

    Phillips Head Screwdriver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

In this video we're going to show you front parking light replacement on this '98 Corolla, same as any '98 to '02 Corolla. The only tool you'll need is a Phillip's screwdriver.

There's a Phillips screw right on top. Remove that. What you have to do is you have to take the headlight, shake it up and down, pull it forward.

If you're just looking to replace the bulb, twist that out. The bulb then pulls out, pushes back in. If you wanted to replace this whole socket, there's a little button right here. Press the button, pull the socket out.

If your side marker parking light was damaged then you want to have a nice new one. We're going to put a nice new one in to match these nice new headlights that we just put in. New lights from 1A Auto plug right in. There are two things that hold it. There's a tab back here. You need to make sure it goes into this slot in the fender. Then this locking tab right here goes right into this slot. So, for this tab up here where the Phillips screw holds it, just make sure it goes in between the light and the fender. Then move back here. You can see that tabs going in, a little under, you can see that the locking tab's going in. Get it into place. Give it a good little push. Put your Phillip's screw back in and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

1998 - 2000  Toyota  Corolla
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...