1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Corner Light 93-97 Toyota Corolla

Share on:

How to Replace Corner Light 93-97 Toyota Corolla

Created on: 2011-09-30

Check out this video to learn how to replace both the corner light bulbs and assembly on your 93-97 Toyota Corolla.

  1. step 1 :Removing the Side Marker Light
    • Raise and support the hood
    • Remove the Phillips head screw from the side marker light
    • Shake the marker light loose
    • Pull the marker light forward and out
    • Twist the bulb socket counterclockwise and out of the marker light
  2. step 2 :Servicing the Side Marker Light Bulbs
    • Pull the old bulb out of the socket
    • Push the new bulb into the socket
  3. step 3 :Installing the New Side Marker Light
    • Twist the bulb socket into the new marker light
    • Push the marker light into place
    • Insert the Phillips screw into the marker light

Tools needed for replacement

  • Screwdrivers & Related

    Phillips Head Screwdriver

Installation Video
Watch video

Brought to you by, your source for quality replacement parts and the best service on the Internet.

In this video, we show you how to replace the side marker lights, that light right next to the headlight on this '94 Corolla, the same as any '94 to '97. We show you both replacing the whole assembly, as well as just the bulb. The only tool you'll need is a Phillip's screwdriver.

Pop your hood, open it up and attach the support rod. There's going to be a screw to remove right here. Then what you want to do with these, you want to kind of shake them around a little bit. There's a pin in here that holds it that can be tight sometimes. So, just give it a good shake. Then I reach in with this finger and I can latch around the piece of plastic that's going in this way and pull with both hands. Bring it up and out.

Then this goes counter-clockwise and pulls out. Then there's a bulb that will come out.

Here's our new light from 1A Auto. Obviously if your corner light's broken you're going to need a new one. You can also see it's just a little clearer, a little nicer and cleaner than the original. Put the bulb in, twist it clockwise, then put the light in. Make sure the bottom is going into the pin. Push back some. Insert your screw and then tighten it up. Again, you don't need to have this too tight, just make sure it's in there firm. You don't want to over tighten it.

We hope this video helps you out. Brought to you by, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

1994 - 1997  Toyota  Corolla
1993 - 1993  Toyota  Corolla
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.