Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Corner Light 01-04 Toyota Tacoma

Share on:

How to Replace Corner Light 01-04 Toyota Tacoma

Created on: 2014-02-14

Check out this video on how to replace the corner/turn signal light on your 01-04 Toyota Tacoma.

  1. step 1 :Removing the Side Marker Light
    • Remove the Phillips head screw from the top of the side marker light
    • Pull the marker light forward out of the fender
    • Twist the light bulb socket counterclockwise and out
  2. step 2 :Installing the New Side Marker Light
    • Twist the bulb socket into the new marker light
    • Push the new marker light into place
    • Insert the Phillips screw into the marker light

Tools needed for replacement

  • Screwdrivers & Related

    Phillips Head Screwdriver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace marker on this 2002 Tacoma. You may want to do this if you have a bulb out or if you have cracked up your original light, or maybe your light is faded and dull and you want to put a nice new one on. The only tool you'll need is a Phillips screwdriver.

With your hood open, there's a Phillips screw right here on top. You remove that. Once that's removed you pull your light. You pull this up. Pull your parking light forward and then reach in behind and just twist counterclockwise on the socket. This bulb pulls right out.

Here's a new light from 1A Auto. See, it's nice and clear. If you got a broken one, it plugs right in. There's a tab here that goes in here. There is also a tab at the bottom that goes into the grille right here. Just make sure it's in at the bottom. This has to go under the fender up here. Make sure that tab goes in. Push it in nice and firm. Then make sure this all lines up and you can see the hole that's in the headlight. Screw started. Bring everything together. Then tighten it up.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

2001 - 2004  Toyota  Tacoma
1997 - 1997  Toyota  Tacoma
1998 - 1999  Toyota  Tacoma
2000 - 2000  Toyota  Tacoma
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...