Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Corner Light 01-04 Toyota Sequoia

Share on:

How to Replace Corner Light 01-04 Toyota Sequoia

Created on: 2021-01-16

How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped parking light or turn signal light on Toyota Sequoia, years 01, 02, 03, and 04.

  1. step 1 :Removing the Tail Light
    • Remove the Phillips clip on the parking light with a Phillips screwdriver
    • Disconnect the parking light wiring harness
  2. step 2 :Servicing the Bulbs
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step 3 :Installing the Tail Light
    • Connect the parking light wiring harnesses
    • Insert the parking light into place
    • Push in the Phillips clip

Tools needed for replacement

  • Materials, Fluids, and Supplies

    Gloves

  • Screwdrivers & Related

    Phillips Head Screwdriver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to service the parking light on this 2001 Sequoia, same as any '01 to '04. We're going to show you both the bulbs as well as changing the entire light if one was broken. The only tool you'll need is a Phillips screwdriver.

You want to start out there's a little clip on here. Use a Phillips screwdriver and lightly turn in this center portion. It should come up and out. Once you get that up and out, the whole clip will come right out. Now, you just kind of get your light to move ground a little bit and then pull forward. You just lift the change bulbs.

I'll give you two ways: there are connectors on here and you just press the tab and disconnect them. These twist counterclockwise and the bulb comes out. The bulbs just pull out of these sockets. Put it back in. We'll put it back in, twist it clockwise to lock.

Nice new light from 1A Auto. Obviously great if you've broken one. It's going to go in just like the original. Plug it in first. There's a large line up tab here. Make sure that goes into the fender. Then this clip needs to clip into the headlight. Put that in there. Also up here, this goes right under the fender here. Push it back in. You should be all set.

Give it a little tap. It's back in place nicely. This clip is designed to just go in. Then you just push the middle down to lock it into place.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Gloves

  • Screwdrivers & Related

  • Phillips Head Screwdriver

2001 - 2004  Toyota  Sequoia
2004 - 2004  Toyota  Tundra
2004 - 2006  Toyota  Tundra
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...