Created on: 2020-05-19
Watch this video to learn how to install a new coolant temperature sensor on your 1988-2002 GMC Sierra.
Gloves
19mm Socket
Drain Pan
Ratchet
Safety Glasses
Pocket Screwdriver
All right. So, right here is the coolant temp sensor. Obviously, you don't necessarily have to take off the air filter box. We took it off just for the video purposes, so you can see.
Here's the connector. Grab your small pocket screwdriver, release that clip, and then this should draw up and off. Now we're going to remove this. It's important to remember that coolant's going to come out, so make sure you're wearing all your safety gear and you have your collection bucket underneath.
Okay, that's getting pretty loose. I can see coolant coming out. I'm going to get my new one ready. I want to take a quick peek and make sure it matches up, and then I'm going to put it right in so I don't lose too much coolant. Looks right. Put it right in there.
Now we're going to snug it up. It's important to remember that it doesn't actually bottom out against the engine. You want to go approximately halfway down.
Go a little further here. All right. It's in the approximate direction that it already was. It's not completely bottomed out, but it's definitely threaded in. That looks great.
Let's grab that electrical connector, take a peek. Looks good as well. Plug it in.
Okay, so the next thing you'd want to do is fill up your cooling system.
Watch this video to learn how to fix your coolant temperature sensor. The experts at 1A Auto show you how to replace the sensor on your 01-11 Ford Ranger.