How to Replace Center Dome Light Assembly 2007-11 Honda CR-V
Created on: 2018-07-16
How to replace a cracked, broken, or loose center interior dome light on 09 Honda CR-V
-
step 1 :Removing the Dome Light
- Pry off the dome light lens with a flat blade screwdriver
- Remove the two Phillips screws from the dome light
- Unclip the dome light from the ceiling
- Unplug the dome light wiring harness
-
step 2 :Installing the Dome Light
- Plug in the dome light electrical connector
- Line up the dome light on the ceiling
- Insert the two Phillips screws into the dome light
- Clip the lens onto the come light
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
To pull this lens off, we're going to use a straight blade screwdriver. Just pry in here. In between there. Then the lens will come right off.
We're going to take these screws out. Phillips head screwdriver. Right here. There's two screws holding this on. Once those screws are out, there's two little clips right here and there's a tab here. You push in. You can pull that down, just like that.
Then there's a wire right here and a connector right here. You push down on the connector and pull it out. All right.
Now we're going to connect this connector right here. Just slide it up, just like that. Now we'll take this wire and this wire's going to clip in right here like that. Then we can slide this up.
Line that up with the holes. We'll take our screw. With our Phillips head screwdriver. Get this started, and get it started over here, and snug these screws up. Now take our lens. Line it up in the back and then just push it up.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Dead Car Battery or Low Voltage Warnings Diagnose Battery and Alternator
Andy gets you started with checking the battery and alternator, the two most common electrical problems in your car or truck!
