Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Center Dash Panel 98-12 Ford Ranger

Share on:
  1. step : Removing the Center Dash Panel (0:47)
    • Remove the two 7mm screws on the center trim bezel below the radio
    • Pry out the center trim panel with a flat blade screwdriver wrapper in tape
    • Disconnect all of the electrical connectors and antenna
    • Pry the 4WD selector out with a flat blade screwdriver
  2. step : Removing the Radio (1:50)
    • Press the spring retainers
    • Slide the radio out
  3. step : Installing the Radio (2:22)
    • Press the radio into place
  4. step : Reinstalling the Center Dash Panel (2:30)
    • Reconnect the center dash connectors
    • Insert the center panel into place
    • Tighten the two 7mm screws to the center panel

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!

In this video, we're going to be working with our 2001 Ford Ranger. We're going to show you how to remove and reinstall the center dash panels. Some reasons you might want to do this is to access the wiring to the radio, the cigarette lighter, the fog lights, or maybe the four wheel drive selector switch.

If you like this video, please click subscribe. We have a ton more information on this truck as well as many other makes and models. If you need any parts for your vehicle, follow the link in the description over to 1AAuto.com.

Here are the items you'll need for this repair: 7mm socket, ratchet, and a flat blade screwdriver

Remove the two 7 millimeter screws on the center trim bezel below the radio. We're going to use the small flat-blade screwdriver with some tape on it to keep from marring our dash surface. Pry out on this center trim panel. Reach back and disconnect all of the electrical connectors.

The antennae pops right back and out. This last connector for the 4-wheel drive selector is going to have to be pried up on with our flat-blade screwdriver. With the center dash panel removed, the radio can be simply slid out by locating the two spring retainers on the sides. Simply push down and push the radio out. Radio slides right out of the panel.

Reinstall the radio into the slot. Lift the dash up till the radio locks into place.

Now our panel is ready to go back into our vehicle. Reconnect the 4-wheel drive selector connector. Reconnect the cigarette lighter; there's two wires there. Reconnect the radio harness, the antennae, the fog light switch, and the A/C power outlet connector. Push the entire panel back into place. Then reinstall the two 7-millimeter screws at the bottom of the panel.

Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket


How to Diagnose a Car Wheel Scraping Noise: Brakes or Dust Shield?

How to Diagnose a Car Wheel Scraping Noise: Brakes or Dust Shield?

If you hear scraping noises while rolling, it could be your brakes, or just a bent heat shield. Watch this video to learn how to spot the difference!

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...