How to Replace C Pillar Trim 2005-10 Chrysler 300

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video we're going to be working with our 2006 Chrysler 300. We're going to show you how to move and replace your interior C pillar trim. This will allow you access to components like your antenna, defroster grid, and the seat belts.

If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. And if you ever need parts for your car, you can follow the link down in the description over to 1AAuto.com.

Here are the items you'll need for this repair: 10mm sockets, ratchet, socket extension, T50 Torx bit, Phillips head screwdriver, torque wrench, interior removal trim tool

Remove the rear seat cushion. To do this, you'll grab right where you feel the bracket underneath and pop up firmly, and there's another one on the opposite side. Lift out and remove the lower seat cushion. Pull the tabs to lower the rear seats. Fold down the little flaps, and you'll find a 10mm bolt for the side seat cushion on each side. Remove that with a 10mm socket and ratchet. Once the bolt is removed, firmly grab the top of the seat cushion and pull out to release the clip. We'll repeat this process with the opposite side.

Remove the two Phillips head screws in the lower seat panel. Now you may need to fold this seat up in order to get to the lower screw. Pop the top of the panel out and then up and repeat this process with the lower panel on the opposite side. Use a T50 Torx to remove the seat belt bolt. Once the bolt is out, lower the seat back down. Pop the C pillar off. The last one in the back corner is the trickiest. You're going to actually want to reach back there and pop that manually so you don't break it. Pull your seat belt through the panel. Repeat these steps on the opposite side.

Reinstall the seat belt through the C pillar. Line up the C pillar and snap all of the tabs back into place. Be sure to pull the interior weatherstrip over the C pillar before snapping it entirely into place. Reinstall the T50 Torx bolt at the bottom of your seat belt. Tighten it down and then torque to 25 foot-pounds. You'll have to fold the seat down and install the bottom of the C pillar cover first, then snap the top in. Lay the seat back up and install your two Phillips head screws.

Reinstall the seat panel. Remember to snap the top into place and reinstall your 10mm screw on- And repeat this process on the other side. Reinstall the back seat. Make sure that you pull all of your seat belt buckles up to the appropriate slots in the seat. Slide the rear down into place. Line up the front and then push down to lock it in.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

How to Replace C Pillar Trim 2005-10 Chrysler 300

step 1 :Removing the C Pillar Trim

step 2 :Installing the C Pillar Trim

Tools needed

Is a Puddle Under My Car or Truck Normal Simple Answers to Your Air Conditioning Questions

How to Replace C Pillar Trim 2005-10 Chrysler 300

step 1 :Removing the C Pillar Trim 0:54

step 2 :Installing the C Pillar Trim 3:26

Tools needed

Is a Puddle Under My Car or Truck Normal Simple Answers to Your Air Conditioning Questions

step 1 :Removing the C Pillar Trim

step 2 :Installing the C Pillar Trim