How To Replace Broken Tail Lights Nissan Murano 2003-07
Created on: 2011-10-20
Check out this video to learn how to replace the broken or hazy tail lights on your 03-07 Nissan Murano.
-
step 1 :Removing the Taillight Assembly
- Remove the plastic trim panel next to the taillight.
- Remove the two 10mm bolts.
- Pull the taillight out and off.
- Pull the plug out and disconnect the harness.
-
step 2 :Changing a Bulb
- Turn the socket counterclockwise.
- Pull the bulb out.
- Push the new one in.
- Turn the socket clockwise to lock.
-
step 3 :Replacing the Taillight Assembly
- Remove any clips that came out in the old taillight and replace them.
- Push the harness and plug into place.
- Line up the taillight and press it into place.
- Replace the two 10mm bolts.
- Replace the trim panel.
Tools needed
-
Socket Extensions
10mm Socket
Ratchet
Brought to you by 1AAuto.com , your source for quality replacement parts, and the best service on the internet.
In this video we're going to show you how to remove and replace the taillight on this '06 Murano. The only tool you'll need is a 10mm socket with a ratchet and extension. This is the same procedure for the '03 to '05, and we do show you how to service the bulbs on those years.
The plastic trim panel here pulls off. You just have to pull the pins. You have a 10mm bolt down at the bottom, and one at the top. Fast forward through this as I'm just removing those bolts with a 10mm socket and a ratchet and extension. There's two pins now that hold it. One at the top. If you pull there. Pull it out. See the plug here, pull that from the body, and pull the harness out. There's a little connector here. You need to press on that tab, and disconnect it.
So this light is an '06 and '07. It's the LED style. If you have an '03 to '05, you'll have just the regular bulbs. They pull out by turning counterclockwise, bulbs pull out. That's how they replace. And this light, you might be able to see here, this clip came out. Pry it off, and it goes right back into the body of the car. Plug that in, push it down in. Put it into place. You can kind of see from up here where that pin goes in. This one down here. Clicks into place. Start our bolt here, and start our bolt up here.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet, and in person.
Shop Products
2003-05 Nissan Murano Driver & Passenger Side 2 Piece Tail Light Set DIY Solutions LHT07665
Part Details:
- 2 Piece
- (1) Passenger Side Tail Light
- (1) Driver Side Tail Light
How to Replace Back up Reverse Light 1998-2005 Volkswagen Beetle
This video shows how to change the reverse light bulbs and remove and install the reverse light housings yourself on the 98-05 Volkswagen Beetle
