How to Replace Brake Pedal Pad 01-05 Honda Civic
How to Replace Brake Pedal Pad 01-05 Honda Civic
Created on: 2016-05-13
How to repair, install, fix, change or replace a worn, smooth, loose, or slippery brake pedal pad on 01, 02, 03, 04, 05 Honda Civic
-
step 1 :Removing the Brake Pedal Pad
- Pry the brake pedal pad off the pedal by hand
-
step 2 :Installing the Brake Pedal Pad
- Slide the pad onto the bottom of the pedal
- Pull the pad onto one top corner of the pedal
- Pull the pad onto the other top corner
- Check that the pad is completely hooked onto the pedal
Tools needed for replacement
-
1A - No Tools Needed
No Tools Needed
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Pry out on the backing of the rubber pad on your brake pedal, work it around until the pad comes free.
We have our old part from the vehicle, and here we have our new part from 1AAuto.com. You can see they're exactly the same. These tend to get worn out over time from your foot wearing on and off the edge. You get a little less traction. It makes your foot more likely to slip when you're braking. All it is is this rubber retainer hooks around the backside of the pedal and it pops right into place.
Hook the bottom of the rubber onto the pedal, get it up nice and tight and fold back the top edge and corner on one side. Set it over and do the same on the other. Be sure to feel around the edges and make sure that all of it's hooked over the metal pedal.
Thanks for tuning in. We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools needed for replacement:
- No Tools Needed
1A - No Tools Needed
