Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Blower Motor Resistor 08-14 Volkswagen GTI

Share on:
  1. step : Removing the Blower Motor Resistor (0:15)
    • Unscrew the two plastic retainers that hold the panel on
    • Pull the panel off
    • Press on the clip on the side of the connector for the resistor
    • Push up until it clicks out of place
    • Pull out
    • Disconnect the electrical connection
  2. step : Replacing the Blower Motor Resistor (1:37)
    • Reconnect the new resistor
    • Reinstall the removed panel
    • Insert and hand tighten the two plastic screws
  3. step : Finishing up (1:37)
    • Reinstall the removed panel
    • Insert and hand tighten the two plastic screws

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

Your blower motor resistor is located here underneath the glove box. What you can do is there's these two little screw, you're going to unscrew these fasteners. Just with your hands. They come off. They're plastic. They're very easy to pull off. Come off. And then this panel comes right down. Resister is right here.

What you're going to do is you're going to pull on this white tab and slide it out towards the passenger in the vehicle. Pull it straight down. There's a connector right here. You've got two tabs right here. You're going to push the two tabs down and pull it right out.

Okay, as you can see, this is the old resistor, this is the new resistor from 1AAuto.com. Visually these look almost identical. All the connector tabs are all the same. Same amount of connectors. If your blower mower doesn't work on all speeds this is probably the issue and if you replace this you'll be all set and ready to rock and roll.

Now we're going to reinstall our new resistor. With the connector you're going to align these two tabs up with the two slots on the resistor itself. Just plug it in. You're going to slip it in the heater box. There you go. Take it towards the driver and hear a click and it's good.

Now you're going to replace this lower cover. Get it lined up with these little vent poles that line up with the HVAC vents. And the two fasteners. They're just plastic so you don't want to tighten them too much. Just get them snug. And that's it.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

2009 - 2012  Volkswagen  CC
2006 - 2010  Volkswagen  Passat
2006 - 2006  Volkswagen  Golf
2008 - 2008  Volkswagen  R32
2006 - 2009  Volkswagen  Rabbit
2006 - 2008  Audi  A3
2006 - 2008  Audi  A3 Quattro
2010 - 2014  Volkswagen  Golf
2008 - 2014  Volkswagen  GTI
2009 - 2017  Volkswagen  Tiguan
2007 - 2016  Volkswagen  Eos
2008 - 2015  Volkswagen  Jetta

06-09 Audi A3; 07-12 VW Multifit (w/Climatic A/C) Heater Blower Motor Resistor

VW Audi Blower Motor Resistor DIY Solutions

This part replaces:

  • Standard Motor Products RU-594
  • OE # 1K0959263A
  • DIY Solutions HVA00979
CURT Trailer Hitch Installation Techniques

CURT Trailer Hitch Installation Techniques

Need some tips on making your trailer hitch installation easier? Check out this video to learn more!

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...