1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Blower Motor Resistor 08-13 Nissan Rogue

Share on:
  1. step : Removing the Blower Motor Resistor (0:22)
    • Disconnect the blower motor resistor electrical connector
    • Remove the two Phillips head screws from the blower motor resistor
    • Pull the blower motor resistor down and out
  2. step : Installing the Blower Motor Resistor (2:22)
    • Put the blower motor resistor into place
    • Install the two Phillips screws into the blower motor resistor
    • Connect the blower motor resistor electrical connector

Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!

The blower resistor is located up near the firewall and held in with two Phillips head screws, and the electrical connection. It's hard to get my fingers in there to hold the lock, so I'm going to use a small flat-bladed screwdriver. Push the lock in. Get the connector out.

It's really hard to see where the lower screw is. I’m just kind of doing it by feel. There it is. Get that screw in there. Get that screw loose. I'm going to grab onto the blower resistor, and pull it right out. Have to wiggle it past that little black piece, and then we can pull it right out.

So here's your blower motor resistor. There are little fins in there to cools off the electronics. Plastic cover piece. It's only going to go in one way, so this would be the top, and this is the bottom, because the push connector was on this part.

I'm just going to reach up and reinstall it. I’m going to install the upper screw. It’s easier to see. Get this one started. It's just self-tapping, so it's going to go into plastic. As soon as you feel it gets tight, you can stop, and install the bottom one in. I’m going to reinstall the electrical connector. It'll snap, and it's locked in place.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

2014 - 2015  Nissan  Rogue Select
2007 - 2012  Nissan  Sentra
2012 - 2014  Nissan  NV 2500
2012 - 2014  Nissan  NV 3500
2008 - 2013  Nissan  Rogue
2012 - 2014  Nissan  NV 1500

07-12 Nissan Sentra; 08-15 Rogue; 12-14 NV1500 Blower Motor Resistor

Nissan Blower Motor Module DIY Solutions HVA01002

This part replaces:

  • Standard Motor Products RU-700

Part Details

How To Bleed Drum Brakes on your Car

How To Bleed Drum Brakes on your Car

Learn how to bleed the drum brakes on your older vehicle by watching this video for instructions, and some helpful tips.

Search Videos
Go To Top

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.