Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How To Replace Blower Motor Resistor 01-03 Dodge Grand Caravan

Share on:

How To Replace Blower Motor Resistor 01-03 Dodge Grand Caravan

Created on: 2015-03-17

How to repair, install, fix, change or replace a bad or broken blower motor fan speed resistoron Dodge Grand Caravan, Plymouth Voyager, and Chrysler Town & Country

  1. step 1 :Removing the Blower Motor Resistor
    • Lower the glove box
    • Pull the sides in on the glove box to pull it down
    • Disconnect the two harnesses in the blower motor resistor
    • Loosen the two 8mm bolts
    • Remove the resistor
  2. step 2 :Installing the Blower Motor Resistor
    • Insert the new resistor into place
    • Tighten the two 8mm bolts
    • Connect the two harnesses to the blower motor resistor
    • Push the glove box into place

Tools needed for replacement

  • Ratchets & Related

    Ratchet

    Socket Extensions

  • Sockets - Metric

    8mm Socket

  • Wrenches - Metric

    8mm Wrench

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the air-conditioning or heater fan speed resistor and this is a 2003 Dodge Caravan. It's similar for any Dodge, Plymouth or Chrysler minivans with the manual AC. The only items you'll need are a new resistor from 1AAuto.com and an 8 millimeter socket and ratchet with extension, or actually just an 8 millimeter wrench would work.

Turn the keys to the on position. You can't hear anything from the front fan. It only works on high. Be sure to remove all the items from your glove box. Open the glove box and pull the sides in, it comes down, and your resistor is right here. There are two connectors. This one you push the clip to the side, this one you push a tab up that's on the bottom, remove it, and then push that one to the side and remove it. Now use an 8 millimeter socket and ratchet, and you could actually reach in there with a wrench as well and use that. Remove the two 8 millimeter bolts that hold the resistor in.

With the resistor out, the one on top is the original one; bottom one is the one from 1A Auto. You can see they're going to plug in exactly the same. They don't look quite the same, but our new one will actually function better than the old one because you're going to have all the fan speeds. Here again with the key on, you can hear the fan is working at all speeds. Thanks for tuning in.

Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Wrenches - Metric

  • 8mm Wrench

2001 - 2003  Chrysler  Voyager
2001 - 2007  Chrysler  Town & Country
2001 - 2007  Dodge  Caravan
2001 - 2007  Dodge  Grand Caravan
2005 - 2008  Chrysler  Pacifica
2004 - 2008  Chrysler  Pacifica
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...