How to Replace Blower Motor 2006-15 Chevy Equinox
Created on: 2017-01-16
If the blower motor is loud, weak, or broken, this video will show how to DIY and replace it quickly and easily
-
step 1 :Removing the Blower Motor
- Remove the two 7mm screws securing the panel underneath the passenger side floor
- Remove the panel
- Disconnect the harness bracket from the blower motor
- Disconnect the wiring harness
- Remove the three 1/4 inch screws
- Remove the blower motor
-
step 2 :Installing the Blower Motor
- Insert the blower motor into place
- Tighten the 1/4 inch screws to the blower motor
- Connect the wiring harness
- Press the harness bracket into the blower motor
- Insert the panel into place
- Tighten the two 7mm screws to the panel
Tools needed
-
Socket Extensions
1/4 Inch Socket
7mm Socket
Ratchet
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2008 Chevy Equinox. We're going to show you how to remove and replace your blower motor for the HVAC.
If you like this video, please click subscribe we have a ton more information on this and many other vehicles. If you need this part for your car, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: 7mm socket and ratchet, ¼ inch socket, socket extension
Remove the two 7 millimeter screws, securing this panel underneath the passenger side floor. We'll do this using the 7 millimeter socket ratchet and extension. Once the two screws are removed, remove the panel from under the dash. You'll have to push it over to the passenger side to release it from its hook next to the blower motor. Remove the panel from the vehicle.
Remove this harness bracket from the bottom of the blower motor, push down and release the electrical connector. Remove the three quarter inch screws around the blower motor. We'll do this with a socket ratchet and extension. Support the blower motor while removing the last screw and remove the blower motor from the HVAC box.
Re-install the blower motor. Be sure not to pinch any harnesses, and make sure that the connector for the motor is facing the right way. Start your quarter inch screws by hand before tightening them down with your socket and ratchet. Reconnect the electrical connector and snap the harness retainer back into place. Reinstall the under dash cover. Remember it goes to the passenger side first and we'll have to pull it over. Reinstall the two 7 millimeter screws. We'll start these by hand and then tighten them down with a socket and ratchet.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
How to Replace Blower Motor 1992-2000 Chevy Tahoe
If you need a new blower motor, watch this video to learn how to install one in your 1992-2000 Chevy Tahoe.
