1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Battery 07-11 Honda CR-V

Share on:

How to Replace Battery 07-11 Honda CR-V

Created on: 2018-07-16

How to replace a dead or drained battery on 09 Honda CR-V

  1. step 1 :Removing the Battery
    • Disconnect the negative battery cable with a 10mm wrench
    • Disconnect the positive battery cable with a 10mm wrench
    • Loosen the 10mm battery mounting bolts
    • Remove the battery mount
    • Remove the battery cover
    • Pull out the battery tray
  2. step 2 :Reattaching the Battery
    • Put the battery tray into place
    • Put the battery on the tray
    • Place the cover on the battery
    • Put the battery mount in place
    • Tighten the 10mm battery mounting bolts
    • Reconnect the positive battery cable
    • Reconnect the negative battery cable

Tools needed

  • 10mm Socket


Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

We're going to pop the hood. Over here next to the foot rest, you just pull the lever like that. Release the hood. Put the prop rod there.

And disconnect the negative terminal first. We use a 10mm wrench. Loosen this up. Remove that. Always take the negative off first when you're remove a battery. Then we'll take the positive off. Loosen this with a 10mm wrench. We'll take this off. We can pop this off here. I'll just use a trim tool to get that out of the way.

I'll take a 10mm socket with an extension and a ratchet. I'm going to loosen up this hold down bracket. We don't have to take it all the way off, we're just going to loosen it up because it's clipped in down below. And then once that's low enough then I can release it there. Pull this out. We should be able to pull this one down here. Release that like that and set that aside. We can grab the battery and slide it out.

There's a cover on here, and there's the battery. The tray goes back in there like that. Pick up the battery. Install that. And there's a cover, the cover goes on just like that. Reinstall the hold down. We're going to have to slide these into the little holes down below, so right there like that. Then on the front side we'll do the same right there like that. Take our 10mm socket extension and ratchet, tighten these down. You're going to want to do these kind of evenly, just like that. Next, before I put the terminals on, I just want to clean these out. Can use a terminal tool. Make sure you get a good connection. We'll do the same to this negative post as well, negative terminal. Just clean that out.

Now when you're installing the battery, you're connecting it, you always want to connect the positive side first, that way if you are tightening this down with your 10mm ratchet and you hit a ground, it's not going to arc out. Versus if you had it connected with the ground first and you touched ground with your wrench, you're going to arc it out and it'll have sparks. It'll be a bad day. Then we'll tighten the negative up. Just snug. Grab the terminal and just shake it side to side. Make sure it's tight. You can reinstall this retainer that holds the wire on. We can close the hood. Put the prop rod there.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

How To Replace Manual Window Crank Handle

Watch this video to learn how to fix a broken or loose window hand crank. The experts at 1A Auto show you how to replace the crank on vehicles with manual windows.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.