Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Ambient Air Temp Sensor 02-09 Toyota 4Runner

Share on:

How to Replace Ambient Air Temp Sensor 02-09 Toyota 4Runner

Created on: 2019-10-03

Watch this video to learn how to replace the ambient air temperature sensor on your 02-09 Toyota 4Runner.

  1. step 1 :Removing the Ambient Air Temperature Sensor
    • Open the hood
    • Pry the ambient air temperature sensor out from the support beam
    • Disconnect the electrical connector
  2. step 2 :Installing the Ambient Air Temperature Sensor
    • Connect the electrical connector
    • Push the retaining clip into the mounting hole in the support beam

Tools needed for replacement

  • Specialty Tools

    Plastic Fastener Remover

Installation Video
Watch video

Hey friends, it's Len here from 1A Auto. Today we're going to be working on our 2006 Toyota 4Runner, and I want to show you how to remove and install your Ambient Air Temp Sensor. If you need any parts, check us out, 1Aauto.com. Thanks.

All right, so let's get the hood up here. Awesome. We can see our Ambient Air Temp Sensor, it's located right here. You've got the wiring harness that goes into it, should have a little push tab right there. If you wanted to, you can squeeze that now and just try to lift it up. If it doesn't want to come apart, which is very common, what I would do, I would take my little forky tool or you can use whatever you've got. Just get right in between here and pull out this clip. Now you can get a much better grip on this. Just going to give this a little squeeze. It still doesn't feel like it squeezes in very far, but if you look down inside there and see where the lock is, when I push that down, it shouldn't want to come unlocked. So I'm just going to grab that with my flat screwdriver and give this a tug. This right here is your Ambient Air Temp Sensor, and then of course the clip. The clip itself just has a little lock here. And then this should slide out this way. See if I can get it.

Now, of course this one doesn't want to come off very easy, but this right here, the black part, is the sensor. If you were replacing it, you would just take this clip off by squeezing that lock right there and then it should come right off. All right, slide your new one on. Take your Ambient Air Temp Sensor, you're going to put the wiring so it's ready to face up. Check the original harness. Make sure you don't see any funny colors in there, rust or anything besides metal, is no good, so you'd want to either clean this out or you can just replace it. We'll clip it in. I hear a little click, give it a nice tug. It's not coming apart. Take this, give it a squeeze in there. Grab our tools, close the hood, down the road you go.

Thanks for watching. Visit 1Aauto.com for quality auto parts shipped to your door, the place for DIY auto repair. And if you enjoyed this video, please click the subscribe button.

Tools needed for replacement:

    Specialty Tools

  • Plastic Fastener Remover


Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...