How to Replace Air Flow Meter Sensor 2003-04 Ford Crown Victoria
Created on: 2014-02-28
How to repair, install, fix, change or replace a broken, worn out, or damaged air flow sensor on 03, 04, Ford Crown Victoria
-
step 1 :Removing the Air Intake Box
- Disconnect the mass air flow sensor wiring harness
- Open the air box clips
- Loosen the air intake hose clamps with a flat blade screwdriver
- Open the air intake box
- Remove the air intake box from the hose
-
step 2 :Removing the Mass Air Flow Sensor
- Remove the four 10mm bolts on the Mass Air Flow Sensor
- Insert the new mass air flow sensor
- Insert and tighten the four 10mm bolts
-
step 3 :Installing Air Intake Box
- Connect the air intake hose to the air intake box
- Insert the air intake box into its slots and connect the clamps
- Tighten the air intake hose clamp with a flat blade screwdriver
- Connect the mass air flow sensor wiring harness
Tools needed
-
Flat Blade Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a mass air flow sensor on this 2004 Ford Crown Victoria with the 4.6-liter V8 engine. The only tools that you're going to need for this is a 10mm socket and ratchet and a flat blade screwdriver.
Your mass air flow sensor is located right here. You want to disconnect the harness by just pushing on the tab and pulling it free. Then flip both of these clips up and loosen this hose clamp with your flat blade screwdriver. You want to move that hose free, pull these clips back, push the top of your air intake box away from you and then up, and pull it free from the hose.
Now, you want to remove these four 10mm bolts on your mass air flow sensor. Take your new mass air flow sensor and line it up on your air intake box and replace those four 10mm bolts. We'll just fast-forward as Don does this.
Now, you want to line up these slots with these tabs, but first push your mass air flow sensor into the hose, line the slots up with the tabs, pull the top of your air intake box forward, and then re-clip it. We'll just push down those clips to lock them, then tighten up that hose clamp, reconnect your mass air flow harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Mass Air Flow Sensor 2005-14 Ford Mustang
Check out this video to learn how to install a new Mass Airflow Sensor (MAF) on your 2005-14 Ford Mustang.
