Created on: 2015-01-08
How to remove, install, fix, change or replace a broken Mass Airflow Sensor / Meter on 01, 02, 03, 04, 05, 06, 07 Ford Escape, Mercury Mountaineer or Mazda Tribute.
T20 Driver
1/4 Inch Wrench
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you how to replace the mass air flow sensor on this 2002 Ford Escape with the 2-liter 4-cylinder engine. It's the same part and similar process on these Escapes from 2001 to 2004. The items you'll need for this are a new mass air flow sensor from 1AAuto.com and a T20 Torx driver or a ¼ inch wrench.
Your mass air flow sensor is right here. Just push the tab on this harness and disconnect it. Then the mass air flow sensor we're using to replace this one actually came with this T20 Torx security bit. You can either use a 1/4" wrench with this bit to remove those two screws or you can take a driver with replaceable bits and just put it into that and remove the screws that way. Then the mass air flow sensor will pull out.
On the right is the old mass air flow sensor; on the left is the new one from 1AAuto.com. You can see they're identical and they'll fit exactly the same. Just going to put just a little bit of oil on the O-ring. Lower your new mass air flow sensor into place. Make sure it's all the way down in and then replace those two T20 security screws. Just reconnect the harness.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Check out this video to learn how to replace the mass airflow sensor on your 03-06 Volvo XC90. Then get the part you need to do it yourself at 1AAuto.com!