How to Replace Air Cleaner Assembly 2000-05 Chevy Monte Carlo
Created on: 2014-07-09
How to repair, install, fix, change or replace a dirty, dusty, clogged, cracked, warped, or damaged air intake box on 00, 01, 02, 03, 04, 05 Chevy Monte Carlo.
-
step 1 :Removing the Air Intake Hose
- Pull the smaller hose out of the air intake hose
- Disconnect the intake hose wiring harness
- Loosen the two intake hose clamps with a flat blade screwdriver
- Separate the intake hose from the engine
- Separate the intake hose from the air intake box
-
step 2 :Removing the Air Intake Box
- Lift up on the air intake tabs
- Remove the front of the air intake box and the air filter
- Remove the two 8mm bolts from the air intake box with a ratchet
- Push the box forward and pull it up and out
-
step 3 :Installing the New Air Intake Box
- Lift the tabs on the new intake box and remove the front
- Lower the intake box into place
- Line up the bolt holes, replace and tighten the 8mm bolts onto the air intake box
- Place the air filter into place
- Line up the front, push it back, and re-clip the front
-
step 4 :Reinstalling the Air Intake Hose
- Push the intake hose onto the air intake box
- Push the intake hose onto the throttle body
- Tighten the intake hose clamps with a flat blade screwdriver
- Connect the smaller hose to the intake hose
- Connect the intake hose wiring harness
- Clip the intake hose wiring to its bracket
Tools needed
-
Flat Blade Screwdriver
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the air intake box on this 2003 Chevy Monte Carlo. It's the same parts and similar process on these Monte Carlos from 2000 to 2005. The items you'll need include a new air intake box from 1AAuto.com, an 8mm socket, a ratchet, and a flat blade screwdriver.
Lift up the tab and disconnect this harness. Do the same with this harness. Then pull this hose free. Then loosen up these three hose clamps with the flat blade screwdriver. Pull back on this hose, and then lift it up and off the air intake box. Lift up on these two tabs and pull the front of the air intake box off. Then pull out the air filter. Then remove these two 8mm bolts. Now push the box forward and pull it up and out.
On the left is the old air intake box, on the right is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Lift up the tabs in your new air intake box and pull the front off. Lower it down into place. Then line up the bolt tolls, and replace and tighten those two 8mm bolts. Put your air filter back into place, line up the tabs along this panel, and then slide it down into the slots on the air intake box. Then push it back, and re-clip those two clips.
Take this small intake hose ring and push it into place with that tab lining up in that slot. Then push your mass airflow sensor into place. Then take the larger piece of intake hose and push that onto your mass airflow sensor and your throttle body. And you want to make sure that the arrow on the mass airflow sensor is lined up with the arrow on the hose. Once you have everything in place, just tighten up those three hose clamps. Now, push this hose back into place, reconnect those two harnesses, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Air Filter Housing 1999-2002 Chevy Silverado
How to repair, install, fix, change or replace a dirty, dusty or clogged air filter on 00, 01, 02, 03, 04, 05, 06, Chevy Suburban, or Tahoe; or GMC Yukon
