How to Replace AC Condenser Cooling Fan 2001-06 Hyundai Elantra
Created on: 2013-05-15
Learn how to replace the driver's side radiator fan easily yourself by following the straightforward steps in this how-to video
-
step 1 :Removing the Radiator Fans
- Remove the radiator overflow hose from its clip and put it aside
- Disconnect the wiring harness from the passenger side fan
- Remove the two 10mm bolts from the passenger side fan
- Pull the passenger side fan away from the radiator and up and out
- Remove the wiring harness from the driver side fan
- Remove the 10mm bolt from the driver side fan
- Pull the driver side fan away from the radiator, under the upper radiator hose, and up and out
-
step 2 :Installing the New Radiator Fans
- Slide the driver side fan under the upper radiator hose and into place
- Insert the fan tabs into the radiator tabs
- Insert the 10mm bolt into the driver side fan
- Connect the wiring harness to the driver side fan
- Push the passenger side fan into place
- Insert the fan tabs into the radiator tabs
- Insert the two 10mm bolts into the passenger side fan
- Connect the wiring harness to the passenger side fan
- Connect the radiator overflow hose to its clips
Tools needed
-
10mm Wrench
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and reinstall the left hand or driver's side radiator fan in this 2005 Hyundai Elantra, pretty much the same for any 2001 to 2006 Elantra. The only tool you'll need is either a 10mm wrench or a 10mm socket with a ratchet.
I'm removing the radiator overflow hose from its clip, and pulling it aside, and while I'm doing the clip, the power to the fan. Put the clip on top, pulling that aside. I'm locating the two 10mm bolts, right here and right here. I'm going to push the radiator fan just a little bit away from the radiator and pull up and out. I've located the connector for the fan and I'm going to remove it by pressing down on the tab. I've located the 10mm bolt that I'm going to take out here. With this fan, I'm going to push it away from the radiator just a little bit, pull it out and then slide it over underneath the upper radiator hose and out.
I'm reinstalling these fans. These fans tested fine and worked perfectly, but a fan from 1A Auto is going to be an exact replacement fit. I just want to point out the two tabs on the bottom of the fan. Those are going to slide into tabs at the bottom of the radiator. This fan slides in and over and then into the two tabs. I'll reinstall my 10mm and reconnect my harness. We've got the two tabs on the bottom here and they're going to slide into two tabs at the bottom of the radiator. Reinstall my bolts and I'm going to plug the connector back in and put the radiator drain hose back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Radiator Cooling Fan Assembly 2005-06 Chevy Silverado V6 4-3L
How to repair, install, fix, change or replace a broken radiator dual fan assembly. If your car overheats or runs hot and the radiator cooling fan will not turn on then this may be your solution. This video shows the process for the 05, 06 Chevy Silverado
