How To Replace 3rd Brake Light 2004-14 Nissan Titan
Created on: 2014-04-18
This 1A Auto video shows you how to replace the third brake light on your 04-14 Nissan Titan. You can do it yourself, and 1A Auto will show you how!
-
step 1 :Removing the Third Brake Light
- Pry off the two plastic caps in the truck cab ceiling with a putty knife
- Remove the two 8mm nuts from the third brake light
- Pull the third brake light off
- Disconnect the brake light wiring harness
-
step 2 :Servicing the Third Brake Light Bulbs
- Twist the bulb sockets counterclockwise and out
- Pull the bulbs out of the sockets
- Push the new bulbs into the sockets
- Twist the bulb sockets clockwise and in
-
step 3 :Installing the Third Brake Light
- Connect the brake light wiring harness
- Push the brake light into place
- Fasten the two 8mm nuts onto the brake light
- Push the two plastic caps into the truck cab ceiling
Tools needed
-
Flat Blade Screwdriver
Putty Knife
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service as well as replace the third brake light on this 2009 Nissan Titan. The tools you'll need are a putty knife or flat blade screwdriver and an 8mm socket and ratchet.
Underneath the third brake light, inside the cab of the truck, you'll see these two plastic caps. Using a putty knife or a flat blade screwdriver, just pry them free. Inside each hole, there's an 8mm nut. We'll just fast forward as Don removes those. Now pull your third brake light free and then push the tab on the harness and disconnect it.
To service the bulbs just twist the socket counterclockwise, pull the old bulb out, push your new bulb in, and twist it clockwise to lock it. The two side lights are the same thing. Just twist them, pull the bulb out, and twist them clockwise to lock them.
Connect your harness to your new third brake light and push it back into place. Now place the 8mm nut into your socket and feed it up onto the stud and twist it on and tighten it up. Repeat the process for the other one. Now replace those two caps and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Third Brake Light 2002-09 Chevy Trailblazer
Watch this 1A Auto instructional video to find out how to replace the third brake light on your 02-09 Chevy Trailblazer.
