Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace 3rd Brake Light 00-06 Chevy Suburban

Share on:

How to Replace 3rd Brake Light 00-06 Chevy Suburban

Created on: 2014-04-21

Check out this video on how to replace the rear third brake light on your 00-06 Chevy Suburban.

  1. step 1 :Removing the Third Brake Light
    • Remove the Phillips screws from the brake light
    • Maneuver the brake light off
    • Disconnect the brake light harness
    • Remove the rubber cover from the brake light
  2. step 2 :Installing the New Third Brake Light
    • Replace the rubber cover around the brake light
    • Connect the brake light harness
    • Insert the brake light into place
    • Insert and tighten the Phillips screws into the brake light

Tools needed for replacement

  • Screwdrivers & Related

    Phillips Head Screwdriver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the third brake light on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans from 2000 to 2006. The items you'll need for this include a new third brake light from 1AAuto.com and a Phillips screwdriver.

The third brake light is held in with two Phillips screws. Just go ahead and remove both of those. Now, just pull the third brake light down, and you do have to maneuver it a little bit to get it down and out. Now, just lift up on this tab, disconnect the harness, and just remove that cover from your third brake light.

On the left is the old third brake light; on the right is the new one from 1A Auto. You can see they're going to fit exactly the same and have all the same mounting points.

Take that cover and put into place on your new third brake light. Now reconnect your harness, and then feed your third brake light back up into place. Once you've got it lined up and back in place, just replace those two Phillips screws, and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

2000 - 2006  GMC  Yukon
2000 - 2006  Chevrolet  Tahoe
2000 - 2006  Chevrolet  Suburban 1500
2000 - 2006  Chevrolet  Suburban 2500
2000 - 2006  GMC  Yukon XL 1500
2000 - 2006  GMC  Yukon XL 2500
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...