Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Remove Turn Signal Lever 96-04 Nissan Pathfinder

Share on:

How to Remove Turn Signal Lever 96-04 Nissan Pathfinder

Created on: 2021-01-16

How to repair, install, fix, change or replace a broken, damaged, faded, worn or faulty turn signal switch on 00 Nissan Pathfinder

  1. step 1 :Removing the Steering Column Trim
    • Remove the six Phillips screws from the lower steering column trim panel
    • Pull the lower steering column panel down
    • Pull off the ignition switch trim piece
    • Pull the upper steering column panel up and off
  2. step 2 :Removing the Turn Signal Switch
    • Remove the two Phillips screws from the turn signal switch
    • Pull the turn signal switch off the steering column
    • Unplug the turn signal switch electrical connectors
  3. step 3 :Installing the Turn Signal Switch
    • Connect the turn signal switch electrical connectors
    • Line up the switch on the steering column
    • Fasten the two Phillips screws into the switch
  4. step 4 :Installing the Steering Column Trim
    • Line up the upper trim panel on the steering column
    • Clip the lower and upper trim panels together
    • Line up the ignition switch trim piece
    • Clip the ignition switch trim piece into place
    • Fasten the six Phillips screws into the lower trim panel

Tools needed for replacement

  • Screwdrivers & Related

    Phillips Head Screwdriver

Installation Video
Watch video

Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!

All right. We want to remove this lower cover. There's Phillips head screws. There's one, two, three, four, five, six Phillips head screws you need to take out of this cover. All right, now, I got all those screws out. Now, I can grab the panel, right here. Pull it down. There's a trim piece that goes over your ignition switch. Just pull that out. Pull this down. It doesn't have to come down any further than that. You can pull the upper one off. Pull that out of your way.

Then, there is two Phillips head screws holding the turn signal indicator switch. We'll take those two Phillips head screws out. All right, so pull that. Pull those two screws out. Then, you can grab the turn signal switch. Pull it up. Then, there's a connector right here. You can push down on it with your finger, or push the lock down with the little screwdriver. As you push down, you want to pull it out, just like that. Then, there's this little white connector. You can squeeze this lock right here, and then pull that out. Just squeeze that like that. Then, there's a connector right here. Do the same with this connector. Just push down on the lock. Pull the connector out, and there's your turn signal multifunction switch.

All right, we're going to put this turn signal switch, headlight switch, fog light switch back together. You'll take this connector right here. I'm going to plug it in here till it locks, just like that. Then, the white connector, connect that one. This other brown connector, plug in like that.

I'm going to line it up. It's going to slide down, just like that. Then, we'll take these two screws, and get that one started. Then, I'll get the other one started. Then, we'll tighten them down. Just snug them down, not too tight. You don't want to strip them. That's good.

I'll take our upper panel and slide it in position. Then, we can lift up on the lower panel. You're going to lock the two together, just like that. Do the same on the other side. We'll reinstall this trim piece. This goes right here. There's a little tab right here that lines up underneath here. Twist this to get this to line up, just like that.

I can reinstall these six screws. Snug those up, not too tight. You are screwing it into plastic, so, you don't want to strip it, just snug. All right, snug those up, and that's it.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver


SOLVED Low speed ABS activation Chevy Trucks

SOLVED Low speed ABS activation Chevy Trucks

If the ABS pump engages and the brake pedal presses further than usual and pumps soft and hard, engaging the antilock brakes, this video has a solution

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...