How To Remove Rear Seats 1982-92 Chevy Camaro Iroc-Z
Created on: 2011-07-21
How to repair, install, fix, change, replace or remove the rear seats in your 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, or 92 Chevy Camaro and Iroc-Z, Pontiac Firebird and Trans Am models.
-
step 1 :Removing the Seats
- Remove the 13mm bolt underneath each seat bottom
- Pull each seat bottom up and out
- Remove the 13mm bolts under the seat back
- Lift the seat back up and out
Tools needed
-
13mm Socket
Socket Extensions
Ratchet
13mm Wrench
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video we're going to show you how to remove the rear seat in this 1986 Camaro IROC-Z. This has the solid or one-piece seat back. If you have a vehicle that has the two-piece seat back, the procedure's probably a little different. The tools you'll need are a 13mm socket with a ratchet and extension, as well as a 13mm wrench.
To remove the rear seats, with the 13mm socket, you'll feel it right under the middle of the seat. There's a bolt. It comes up and out. Then repeat that for the driver's side. To get the seat back out, up underneath there's a couple 13mm nuts on each side, there and there. We'll fast forward through me removing those nuts. The best tool to use is actually a 13mm wrench as the ratchet head doesn't really fit in the close quarters.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Truck Leaning Sagging or Uneven How to Inspect Leaf Spring Suspensions
If you hear clunking or creaking noises when you load the bed or drive around, or if your truck has a lean to it, check out this video.
