How to Remove Rear Seat Cushion 2005-10 Chrysler 300
Created on: 2017-02-08
How to replace a rear seat cushion on 05, 06, 07, 08, 09, 10 Chrysler 300
-
step 1 :Removing the Rear Seat Cushion
- Feel the bracket underneath the rear seat and pull up firmly
- Remove the lower seat cushion
-
step 2 :Installing the Rear Seat Cushion
- Press on the back seat, push down, lock it in
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
Remove the rear seat cushion. To do this, you'll grab right where you feel the bracket underneath and pop up firmly. There's another one on the opposite side. Lift out and remove the lower seat cushion.
Reinstall the backseat. Make sure that you pull all of your seatbelt buckles up to the appropriate slots in the seat. Slide the rear down into place. Line up the front and then push down to lock it in.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Is Your Trucks Rake Too Extreme How to Level Torsion Bar Suspension For Free
Len shows you how to can raise the front end of your truck if it has a torsion bar suspension!
