Created on: 2018-11-27
How to remove the rear doors on 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18 Jeep Wrangler
Ratchet
T50 Socket
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
What's up, guys? I'm Andy from 1A Auto. Today, I'm going to show you how to remove the rear doors on this 2015 Jeep Wrangler. If you need parts for your vehicle, click the link in the description and head over to 1aauto.com.
First thing we want to do is put the windows down on the doors that we want to remove. So turn the key on. Put those windows down. Put the rear windows down. Turn the key.
All right. To do the rear doors, we're just going to take a T50 torque bit and ratchet, and we're going to take these two bolts out.
Be careful not to scratch the paint while you're doing this.
Once it's loose enough, you can do it by hand. Just like that. And do the bottom one as well.
Take those out. We'll do the same for the other side.
Now we'll open the door to access the connector for the electrical and also the door stop. We're going to have to remove this panel off. We'll just use a trim tool. Get in behind here, pop this cover off, and there's an electrical connector right here. We'll just push down on the tab, pull it off, and the door stop is right here. Just slide this braided strap over the hook and pull it out. Once that's off, grab the door, and just pull it straight, you're going to go straight up with it.
There we go. Slide it out. Put it aside.
Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
In this video, Andy shows you the basics of using a test light, and how to diagnose a basic switched circuit!