How To Remove Rear Door Panel 2002-09 GMC Envoy XL
Created on: 2014-09-03
How to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more. This video, will help you do this on 02, 03, 04, 05, 06, 07, 08, 09 GMC Envoy.
-
step 1 :Removing the Door Panel
- Pry up the door pull trim piece with a flat blade screwdriver
- Remove the two 7mm bolts from the door pill
- Pry out the door panel clips with a putty knife
- Pull the door handle out of the door panel
- Lift the door panel up and off
- Push the window switch out of the door panel
- Disconnect the window switch wiring harness
-
step 2 :Reinstalling the Door Panel
- Lift the door panel into place
- Push in the door panel clips
- Connect the window switch wiring harness
- Push the window switch into place
- Insert the two 7mm bolts into the door pull
- Push in the door pull trim piece
Tools needed
-
Flat Blade Screwdriver
Putty Knife
7mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and replace the rear door panel on this 2003 GMC Envoy XL. The items you'll need for this include a flat blade screwdriver, a 7mm socket and ratchet, and a putty knife.
Start off by prying up this little cover with a flat blade screw driver. Then remove those two 7mm bolts. Stick a putty knife behind the door panel and slide it down until you find the first clip and pry out and reach in behind the door panel and just pull out around each clip. Once you remove each of those clips, you can pull the door handle back. Then just push this switch from underneath. It comes up and out. Then push the tab on the harness and disconnect it. You could technically do this before removing the door panel, but you're more likely to scratch up your door panel if you do that.
To replace your door panel take the small panel and push it back onto these studs. Then, push the harness for that switch back up through the hole in the door panel. Line up the clips on the door panel, and once you have them all lined up, just hit them into place. Reconnect the switch and push it down into place, and then replace those two 7mm bolts and tighten them back up. Now just replace the small cover, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Flip a Seat Belt Buckle in Your Car
how to flip a seat belt buckle that twisted itself in any of your seats in your car.
