How To Remove Rear Door Panel 1998-2000 Volvo S70
Created on: 2012-01-09
How to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more to the Volvo S70, years 98, 99, or 00.
-
step 1 :Removing the Door Panel
- Pry off the trim piece inside the door pull with a flat blade screwdriver
- Remove the T25 Torx screw inside the door pull
- Pry off the door handle bezel by hand
- Pry out the door panel with a door panel clip tool or putty knife
- Lift the door panel up and off
- Disconnect the wiring harnesses from the door panel
-
step 2 :Reinstalling the Door Panel
- If any door panel clips remained in the door, remove them, and push them into the door panel
- Connect the wiring harnesses to the door panel
- If the window seal came off with the door panel, push the window seal into place
- Lift the door panel into place
- Push in the door panel clips
- Insert the T25 Torx screw inside the door pull
- Push in the door pull trim piece
- Push on the door panel bezel
Tools needed
-
Flat Blade Screwdriver
Putty Knife
Door Panel Removal Tool
T25 Torx Driver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to remove and re-install a rear door panel on this 1998 Volvo S70. Tools you'll need are a small flat blade screwdriver, T25 Torx driver, and either a household putty knife or a door panel clip tool.
We're going to remove the rear door panel. When you start there's a little kind of trap door here. You can either use a little screwdriver or just a thumb or fingernail, get in behind,and pull that off. Then there's a T25 Torx screw in behind, remove that. Now, you want to remove this bezel around your door handle. You can just kind of put your fingers underneath and start prying out. That comes off. Now you either want a door panel clip tool or a putty knife. Put it in between the door and the panel and you want to slide down. You'll feel a clip here, pull out. Do the same thing on the back here. Pull out and then pick up. There are a few connectors back here. Usually, you just press on a tab and pull it off. The tab on this one is probably underneath so work your finger back in there. Pull that off. Then your door panel comes off.
To reinstall, first, just make sure all your clips are still on the door panel. If they're in the door, pry them out and then put them back in the door panel. You're going to want to reconnect your harnesses. Put your door lock through. Press your panel towards the window. On my panel, the weather strip came with the panel. You want to take that weather strip off. You install it on here first. Put this door lock through. Push your panel and make sure it goes down in that weather strip. Now your clips should all line up. Replace this T25 screw. Put your trap door back in and reinstall the bezel around your handle.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Change Engine Oil ANY Vehicle By Yourself BEST GUIDE
1A Auto shows the basic procedure for changing the oil on any vehicle.
