1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Remove Rear Door Panel 06-11 Toyota Camry

Share on:

How to Remove Rear Door Panel 06-11 Toyota Camry

Created on: 2017-10-26

How to remove and replace the interior door panel on 09 Toyota Camry

  1. step 1 :Removing the Door Panel
    • Pry the trim panel out of the door handle with a trim tool
    • Remove the Phillips screw inside the door handle
    • Pry the trim panel off the door pull with a trim tool
    • Remove the two Phillips screws inside the door pull
    • Pop out the door panel clips
    • Lift the door panel up and off the door
    • Pull the door handle out of the back of the door panel
    • Disconnect the window switch electrical harness
    • Remove any push clips stuck in the door with a trim tool
    • Slide the push clips into the door panel
  2. step 2 :Installing the Door Panel
    • Pop the door handle into the door panel
    • Connect the window switch electrical harness
    • Line up the door panel with the door
    • Push in the door panel clips
    • Insert the Phillips screw into the door handle
    • Clip on the door handle trim
    • Insert the two Phillips screws into the door pull
    • Clip on the door pull trim piece

Tools needed for replacement

  • Screwdrivers & Related

    Phillips Head Screwdriver

  • Specialty Tools

    Trim Tool Set

Installation Video
Watch video

Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!

I’m working on the rear passenger door. I’m going to remove it. We're going to use these plastic trim tools. You can get these from Pry out this plastic piece that's behind here. Pop the trim tool in here. I’m just going to hold open the door handle. That pops it right out. Put that aside. Remove the screw with a Phillips head screwdriver.

Use our plastic trim tool again. Slide it under here. Pop this handle cover off. Just kind of work it underneath. Put that aside. There's two screws, Phillips head. Remove those. If that screw stays in there, that's fine; we can grab it after we pop the door off. With the three screws removed, we can pop the door off the clips. There's a bit of a lip here, just on the inside of the door. Pull behind it, and I can reach underneath. You just want to reach around the edge of the door, and we pick the door panel up and up from the door. There's the screw that fell out.

Pull the door handle and lock mechanism out, just pops it out, and it'll sit there. Unplug the harness for the window switch. Push in on the lock. Put the door panel aside.

These push clips, they're not damaged; they just popped out. One stuck in the door. I'll use a trim tool to pop that one out. This one went down here and came out, so I'm just going to put it back in. It just slides back into place. It can be reused. I've just got to get that one out of the door.

Take our door panel, make sure all our clips are okay. Take this. It's going to slide in like that. There's two pins in the top and the bottom that match this, it pops into place. Don't forget to plug in your window switch. Nothing like putting this together and then having to take it back off to plug it back in.

There's a groove in here with some clips. They're going to snap into place on here, so I'm going to start with the door panel kind of on the high end. It might be easier with the window down, but you can do it with the window up. You're just going to snap it down into place, then we're going to go down, and push all the clips in.

Start with the small screw that's behind this. Put the plastic cover back in. Start by pushing that clip in first. Then it'll snap in on the back ones, so just open the door handle. Snap that into place. Reinstall the other two screws in the door handle. This just kind of goes straight on.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Trim Tool Set

SOLVED Low speed ABS activation Chevy Trucks

SOLVED Low speed ABS activation Chevy Trucks

If the ABS pump engages and the brake pedal presses further than usual and pumps soft and hard, engaging the antilock brakes, this video has a solution

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.