1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

How to Remove Kick Panel 2002-07 Mazda 6

Created on: 2018-11-05

How to replace a broken or loose kick panel on 07 Mazda 6.

  1. step 1 :Removing the Kick Panel
    • Lift the hood release latch
    • Push up and pull the tab with a flat blade screwdriver
    • Pull the latch toward you
    • Remove the two 8mm mounting screws
    • Pull the kick panel down
    • Disconnect the trunk release connector
  2. step 2 :Installing the Kick Panel
    • Connect the trunk release connector
    • Press the kick panel into place
    • Tighten the two 8mm mounting screws
    • Hook the latch in by lining up the tabs with the slots on the kick panel

Tools needed

  • Flat Blade Screwdriver

    8mm Socket

    Ratchet

Hi, I'm Mike from One A Auto. We've been selling auto parts for over 30 years.

Hey, everyone. Sue here at 1A Auto, and today we're going to show you how to remove the lower knee kick panel on our 07 Mazda Six sedan. Need any parts for your vehicle, click on the link below and head on over to 1aauto.com.

You have to start by removing the hood cable release mount. If you can see here, you take a flat head screwdriver, and there's a tab you push up on, and you pull at the same time. Okay, so I got it. So you have to take a flathead screwdriver and slide it there, and pull down on the tab at the same time. So pull the tab completely down. When that tab gets pulled down, get your two sliding, three sliding ears, and you pull it towards you and it pops right down.

Now we're going to remove these two mounting screws. That's an eight millimeter socket. Grab the kick panel firmly and pull it out. With it hanging down, we can disconnect the trunk release button, pushing on that tab.

We're going to reconnect the trunk switch connector, lock that into place, and you've got all your push tabs location. I'm going to do the top first. Well actually, on this particular model, you might line the bottom up, then the top will slide right in, and then push it on.

And now we've got those two mounting bolts. We'll mount those. Once those are tightened, we'll grab our hood release cable and we've got those three tabs. They're going to line up. Click it into place, and you're ready to go.

Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.


recommended video

How to Clean KN Filter

How to repair, install, fix, change or replace a dirty, dusty or clogged cabin air filter on 15, 16, 17, 18, 19 Subaru Outback

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.